IPEX RV Series ABS Y Strainers and ABS Sediment Strainers protect critical pipeline components by removing solids and suspended impurities. The bottom-entry design permits in-line maintenance and simple cleaning or replacement of worn screens. True union ends facilitate both installation and removal. Pressure rated to 220 psi at 73oF depending on size. Sizes 1/2″ to 2″.
| Size(in) | d(in) | L(in) | Z(in) | H(in) | E(in) | B(in) | Amax(in) |
|---|---|---|---|---|---|---|---|
| 1/2 | 0.84 | 0.63 | 4.06 | 5.31 | 2.17 | 2.83 | 4.92 |
| 3/4 | 1.05 | 0.75 | 4.72 | 6.22 | 2.60 | 3.31 | 5.71 |
| 1 | 1.32 | 0.87 | 5.20 | 6.93 | 2.95 | 3.74 | 6.50 |
| 1-1/4 | 1.66 | 1.02 | 6.10 | 8.15 | 3.43 | 4.37 | 7.48 |
| 1-1/2 | 1.90 | 1.22 | 7.13 | 9.57 | 3.94 | 4.72 | 8.27 |
| 2 | 2.38 | 1.50 | 8.72 | 11.73 | 4.72 | 5.47 | 9.45 |
Flow coefficients (CV) = flow rate in gallons per minute of
water at 68oF that will flow through the valve with a 1 psi
pressure drop. The CV values shown in the table are
calculated with the valve fully open.
| Size(in) | CV |
|---|---|
| 1/2 | 2.80 |
| 3/4 | 4.90 |
| 1 | 7.21 |
| 1-1/4 | 13.2 |
| 1-1/2 | 17.9 |
| 2 | 28.7 |
| # | Component | Material |
|---|---|---|
| 1 | Body | Duraplus ABS |
| 2 | Screen Mesh | PP |
| 3 | Bonnet | Duraplus ABS |
| 4 | Screen Support | Duraplus ABS |
| 5 | O-Ring Seal | EPDM |
| 6 | Retaining Ring | Duraplus ABS |
| 7 | Lock Nut | Duraplus ABS |
| 8 | Split Ring | Duraplus ABS |
| 9 | Socket O-Ring | EPDM |
| 10 | End Connector D | uraplus ABS |
| 11 | Union Nut | Duraplus ABS |
1.0 Sediment Strainers – RV
1.1. Material
• The valve body, end connectors, and unions shall be
made of DuraplusTM ABS compound which shall meet or
exceed the requirements of cell classification 43234
according to ASTM D3965.
1.2. Seals
• The o-ring seals shall be made of EPDM.
1.3. Mesh Screen
• The mesh screen shall be made of PP which shall meet
or exceed the requirements of Type 1 Polypropylene
according to ASTM D4101.
2.0 Connections
2.1. Socket style
• The socket end connections shall conform to
DuraplusTM ABS pipe dimensions as manufactured
by IPEX.
3.0 Design Features
• Strainers shall be Y-pattern in style.
• All sizes shall have true union ends.
• It shall be possible to service the valve without removing
it from the line.
• The filter screen shall be size ASTM 30 mesh.
3.1. Pressure Rating
• Strainer sizes 1/2″ through 1-1/2″ shall be rated at
220 psi at 73oF.
• Strainer size 2″ shall be rated at 130 psi at 73oF.
3.2. Markings
• All valves shall be marked to indicate size, material
designation, and manufacturers name or trade mark.
3.3. Color Coding
• All valves shall be color-coded light gray.
4.0 All valves shall be DuraplusTM ABS by IPEX or
approved equal.
