CPVC Angle Seat Valve

CPVC Angle Seat Valve Supplier in India, which are actuated from the rear, can prevent fluid pressure. It is suitable for high-flow work and is installed in lines where conventional ball and other irrigation valves are difficult to assemble and use.

It is a pneumatically operated, piston-actuated valve with a piston actuator that acts linearly to pull the seal out of its seat. With no seat, the seat is placed at an angle to allow maximum movement. hot temperatures and large flow rates, such as steam or water; Make angle seat piston valve a good choice.

Installed horizontally or vertically, it is flexible. When used in an underground valve box, it is extremely easy to access and wash off after a period of use. Easy Operate CPVC Angle Seat Valve Manufacturer and Exporter in India. This is made possible by a smooth throttling wheel.

A fully closed valve will have zero leakage within the operating pressure range. In terms of design, it is strong and durable. The water hammer does not budge when it is turned on.

CPVC Angle Seat Valve Technical Information

The VV angle seat valve is a shutting-off and regulating valve particularly suitable for clean fluids.

• Connection system for solvent weld, threaded and flanged joints
• Can be installed in any position
• No metal parts in contact with the fluid
• Valve material compatibility (PVC-U) with water, drinking water and other
food substance conveyance according to current regulations
• Can be maintained with the valve body installed

Technical specifications
ConstructionAngle seat shutting-off and regulating valve
Size rangeDN 10 ÷ 50
Nominal pressureDN 10÷25: PN 16 with water at 20 °C
DN 32÷50: PN 10 with water at 20 °C
Temperature range0 °C ÷ 60 °C
Coupling standardsSolvent welding: EN ISO 1452, EN ISO 15493, BS
4346-1, DIN 8063, NF T54-028, ASTM D 2467, JIS K
6743. Can be coupled to pipes according to EN ISO
1452, EN ISO 15493, DIN 8062, NF T54-016, ASTM D
1785, JIS K 6741.
Thread: ISO 228-1, DIN 2999, ASTM D 2467, JIS B
Flanging system: ISO 7005-1, EN ISO 1452, EN ISO
15493, EN 558-1 (DN 10÷50) , DIN 2501, ANSI B.16.5 cl.
150, JIS B 2220.
Reference standardsConstruction criteria: EN ISO 1452, EN ISO 15493
Test methods and requirements: ISO 9393
Installation criteria: DVS 2204, DVS 2221, UNI 11242
Valve materialPVC-U
Seal materialEPDM+PE (EPDM+PTFE or FKM+PTFE on request)
Control optionsManual control