UPVC VALVES

CPVC Pipe Fittings

CPVC Pipe Fittings Manufacturers and Suppliers in India. It is a hard and strong material used for successful installation of plumbing. CPVC’s natural form or material resistance, purity, and ability to resist increased heat conditions inspire an ideal material for personal space, work, and use.

Automatic channeling with fire sprinkler system. CPVC pipe and fittings are intended for personal and commercial use in hot and cold potable water systems.

What is CPVC Pipe Fitting

The CPVC Pipe Fittings material that is produced to using a CPVC layer. Therefore, it meets the demand for the coveted ASTM F441 within ASTM Listing ASTM D2846CPVC applications are made for the transportation of drinking water, controlling waste water from factory waste, as well as for fire protection systems.

CPVC (Chlorinated Polyvinyl Chloride) is another rigid pipe with three highly desirable characteristics, good mechanical strength and high chemical resistance at high temperatures and relatively in comparison to metal. It is more chlorinated than CPVC polymer.

This addition is responsible for the high temperature strength of the chlorine content and other properties that are valuable to industrial piping. For pressure piping applications, temperatures as high as 200°F are recommended, compared to PVC’s 140°F.

Petron Thermoplast CPVC SCH 80 and CPVC SCH 40 Industrial corzan cpvc Gray Piping CPVC pipe range in sizes from 1/2″ to 24″, and CPVC fittings are available for light, medium and heavy duty use.

These are environmentally friendly polymers in terms of low carbonic acid gas emissions in the manufacturing process.

What is the Difference Between PVC and CPVC Pipes

PVC (Polyvinyl Chloride) and CPVC (Chlorinated Polyvinyl Chloride) pipes are both made from thermoplastic materials that are widely used in plumbing systems. However, there are several key differences between them.

One of the main differences is the temperature range that they can handle. PVC pipes are rated for use up to 140°F, while CPVC pipes can handle temperatures up to 200°F. This makes CPVC pipes more suitable for hot water applications.

Another difference is their chemical resistance. CPVC pipes are more resistant to corrosive substances than PVC pipes, making them more suitable for use in industrial and chemical applications.

In terms of cost, PVC pipes are generally less expensive than CPVC pipes, which can make them a more cost-effective option for some plumbing projects.

Finally, it’s important to note that the installation process for CPVC pipes is different from that of PVC pipes. CPVC pipes require a special solvent cement that is designed for use with the material. Therefore, it’s essential to consult with a professional plumber who has experience working with both PVC and CPVC pipes to ensure that the correct materials and installation techniques are used for your specific plumbing needs.

CPVC Pipe Fittings Manufacturers in India

CPVC Pipe Fittings Manufacturers and Suppliers in India. It is a hard and strong material used for successful installation of plumbing. CPVC’s natural form or material resistance, purity, and ability to resist increased heat conditions inspire an ideal material for personal space, work, and use.

Automatic channeling with fire sprinkler system. CPVC pipe and fittings are intended for personal and commercial use in hot and cold potable water systems.

CPVC for Industrial Chemical Applications Physical Properties

CPVC (Chlorinated Poly Vinyl Chloride) has similar physical properties to CPVC and chemical resistance properties are similar to or generally superior to CPVC piping systems. The design stress of CPVC is also 2,000psi at 73°F (23°C).

Maximum service temperature is 200 °F (110 °C) under pressure with occasional exposure to boiling water. It has proven to be an excellent piping material for hot corrosive liquids, hot and cold water delivery, and similar chemical applications above the temperature range of CPVC corzan.

What are the Fittings in CPVC Pipe?

CPVC pipe fittings are components used to connect and control the flow of CPVC pipes. These fittings can be classified into various types, including:

  1. Coupling: Used to join two CPVC pipes together.
  2. Elbow: Used to change the direction of the pipe flow.
  3. Tee: Used to create a branch or junction in the pipe system.
  4. Union: Used to allow for easy removal of a section of the pipe for maintenance or repair.
  5. Valve: Used to control the flow of water in the pipe system.
  6. Adapter: Used to connect CPVC pipes to other types of piping systems, such as copper or PVC.
  7. Reducer: Used to reduce the diameter of the pipe.
  8. End Cap: Used to close the end of a CPVC pipe.

These fittings are essential components for constructing a CPVC pipe system, ensuring a secure, leak-free connection between the pipes and controlling the flow of water.

Advantages of CPVC Pipe and Fittings

· Safe for the environment
· Long last and durable
· Easy installation
· Deterioration safe
· Cost-effective
· Good for transporting warm and cold water.
· Hostile to chemical compounds.
· Cannot burn unless any external fuel effect.
· Preferred at places demanding pure water supply.

CPVC pipes and fittings are supplied by various manufacturers. They are easily approachable in Schedule 40 as well as Schedule 80 sizes. It is likewise CPVC pipes that are fit for transporting both hot and cold consumable water. However, the conveyance relies on copper tube measurements (OD), IPS pipe (OD), and wall width of SDR 11.

The CPVC Pipe and Fittings Manufacturers of distinct measurements start from 1/2″ to 24″. It is accepted in India in every quality pipe or installation and mechanical structure.

CPVC Pipes and Fittings Manufacturing Products

1). No.1 CPVC pipes and fittings are created for the accomplishment of increased temperature so it improves fire and ecosystem deterioration caused by chemicals.

2). CPVC pipe & fittings support hot and cold water application starting from 0° C to 93°C.

3). CPVC pipe and fittings are produced in different measurements beginning from 1/2″ to

4). 4″. It is accepted in India in every plumbing quality and mechanical framework.

5). CPVC is an intense temperature polyamide piping and fitting framework that is utilized for installing a water system

CPVC Pipes And Fittings Technical Details

CPVC compound is often used in the following industries for piping, ducting, and sheet and linings.

CHEMICAL PROCESSING

Reliably transport aggressive chemicals at high
temperatures, under pressure, without corrosion
concerns.

COMPATIBLE WITH:

  • Hydrochloric acid
  • Phosphoric acid
  • Sodium chloride
  • Sodium hypochlorite
  • Sodium hydroxide (caustic soda)
  • Sulfuric acid

COMMON USES:

  • Production facilities
  • Blending operations
  • Reagent processes
  • Air scrubbing
  • Wastewater treatment and
  • demineralization operations

CHLOR ALKALI

Transport harsh chemicals through some of the most
corrosive environments imaginable with optimal
service life.

COMPATIBLE WITH:

  • Cell liquor (brine, sodium hydroxide)
  • Concentrated sodium chloride (brine)
  • Demineralized / deionized (DI) water
  • Hydrochloric acid
  • Sodium hypochlorite
  • Sodium hydroxide (caustic soda)
  • Sulfuric acid
  • Wet chlorine gas

COMMON USES:

  • Pipes
  • Tanks
  • Headers
  • Manifolds
  • Chlorine drying towers

Case Studies

Why a GE Industrial Plant Prefers FRP / CPVC Piping for Its Wet Chlorine Lines Why Chemical Storage Tank Fabricator Tri-Clor Only Specifies Petronthermoplast® CPVC Why CPVC’s Versatility Made it the Obvious Choice for AkzoNobel

MINERAL PROCESSING

Resist abrasion and withstand other demands of
precious and raw material processing operations.

COMPATIBLE WITH:

  • Copper sulfate
  • Metabisulphite
  • Sodium cyanide
  • Sodium sulfate
  • Sulfuric acid
  • Zinc sulfate

COMMON USES:

  • Electrolysis operations
  • Electrowinning
  • Electrorefining
  • Acid service lines
  • Tailings lines
  • Gas vent scrubbers
  • Froth flotation operations
  • Wastewater treatment plants

POWER GENERATION

Stand up long-term to the high pressures and
corrosive chemicals commonly used by power
plants.

COMPATIBLE WITH:

  • Alum
  • Caustic soda
  • Ferric chloride
  • Ferrous chloride
  • Hydrogensulfide
  • Hypochlorite
  • Sodium sulfite
  • Sulfuric acid

COMMON USES:

  • Underground cooling water loops
  • Cooling tower risers and headers
  • Demineralizer systems for creating
  • boiler feed water
  • Condensate return water applications
  • Flue gas desulfurization systems
  • Environmental systems (for coal-fired steam plants)

SEMICONDUCTORS

Meet the high purity standards for cleanrooms and
eliminate corrosion concerns caused by aggressive
chemicals.

COMPATIBLE WITH:

  • Ammonium hydroxide
  • Hydrochloric acid
  • Hydrofluoric acid
  • Nitric acid
  • Sodium hydroxide
  • Sulfuric acid

COMMON USES:

  • Processing operations
  • Fluid handling
  • Exhaust ventilation
  • Wastewater applications
  • Lithographic plate etching

WASTEWATER TREATMENT

Put an end to corrosion, even when transporting
the most aggressive disinfection chemicals.

COMPATIBLE WITH:

  • Acids: sulfuric, nitric, hydrochloric and phosphoric
  • Aggressive saltwater
  • Alum
  • Alkaline lime slurry
  • Disinfectants and dechlorination chemicals
  • Ferrous chloride and ferric chloride
  • Hydrogen sulfide
  • Microorganisms in high concentrations
  • Sodium hydroxide (caustic soda)
  • Sodium hypochlorite

COMMON USES:

  • Primary and secondary wastewater treatment
  • Advanced water treatment
  • Biological denitrification
  • Double-containment systems
  • Wastewater odor control
  • Wet air scrubbers
  • Metal chelating agents in a liquid redox process
  • Desalination systems for the reverse osmosis processing

Case Studies

How Goodrich’s Chromium Emission System Exceeds EPA Requirements CPVC Replaces Steel and PVC at Delta Faucet’s Largest Plant

Chlorinated polyvinyl chloride (CPVC) is

an important engineering thermoplastic due to its:

High heat distortion temperature

Certified for use up to 200°F (93.3°C).

Relatively low material cost.

Has successfully replaced and outlasted metals and other costly materials.

Inherent chemical resistance.

Corrosion-free piping to maintain pressure ratings, flow rates and fluid purity, and to prevent costly repairs.

Simple and superior installation.

Solvent welding fuses the piping and fitting at the molecular level, maintaining system performance.

Fire-related safety advantages.

Heat transfer coefficient is approximately 1/300th that of steel, and the material does not sustain burning and requires no flame to install.

Certified pressure rating.

Pressure rated in accordance with ASTM D2837, having a Hydrostatic Design Basis (HDB) of 4000 psi at 72°F (23°C) and 1000 psi at 180°F (82.2°C).

Handling & Installation Procedures

1. Cement Application

Aggressively work a medium layer of cement into the fitting socket. Avoid puddling the cement in the socket. On bell end pipe do not coat beyond the socket depth or allow cement to run down into the pipe beyond the spigot end.

2. Cement Application

Apply a second full, even layer of cement on the pipe.

3. Assembly

Without delay, while the cement is still wet, assemble the pipe and fittings. Use sufficient force to ensure that the pipe bottoms in the fitting socket. If possible, twist the pipe a quarter turn as you insert it.

4. Assembly

Hold the pipe and fitting together for approximately 30 seconds to avoid push out. After assembly, a joint should have a ring or bead of cement completely around the juncture of the pipe and fitting. If voids in this ring are present, sufficient cement was not applied and the joint may be defective.

5. Joint Cleaning

Using a rag, remove the excess cement from the pipe and fitting, including the ring or bead, as it will needlessly soften the pipe and fitting and does not add to joint strength. Avoid disturbing or moving the joint.

Joint Cure Schedule

Temperature
Range (oF)
Temperature
Range (oC)
Pipe Size (in) & system operating pressure
1/2 to 1-1/4
1-1/2 to 2
2-1/2 to 8
10 to 14
10 to 14
<160psi
160 – 370psi
<160psi
160 – 315psi

Advatages of Eslon Sch80 PVC and CPVC Pipe Ranges

It is recommended for temperatures as high as 200°F compared with 140°F of CPVC. Eslon Sch80 CPVC Pipe ranging in sizes from 1/2” through 24”. These are available for light, medium, and heavy duty use. These are environmentally friendly poly- mer in terms of low carbonic acid gas emission in manufacturing process.

CPVC (Chlorinated Polyvinyl Chloride) is another rigid pipe which has three highly-desirable characteristics, good mechanical strength at high temperatures and higher chemical resistance and relatively compared to metal. CPVC polymer is more chlorinated into PVC polymer. This extra chlorine is responsible for the material’s high-temperature strength and other properties which are valuable for industrial piping.

Conclusion

Petron Thermoplast is among India’s greatest CPVC pipe manufactures and suppliers. These are employed for different factory and residential conveyance applications. It is also considered safe for fire sprinkler frameworks.

However, over temperatures can weaken the plastic and check 1 inch, 2 inch, 3 inch, 4 inch and 5 inch CPVC Pipe Price lists and all range sizes available here.

.

CPVC Pipes And Fittings & Valves Products Catalogue

We have all CPVC Pipes and Fittings Range in all different sizes for different uses check fittings catalogue for your require product details like- 1inch, 2inch, 3inch, 4inch and 5inch CPVC Pipe Price lists. Click on enquiry button to get free quote.

CPVC Pipe & Fittings

CPVC Pipe & Fittings

GET THE LATEST UPVC PIPE FITTINGS AND VALVES PRICES ON YOUR EMAIL