PEEK SOLID RODS

PEEK (Polyetheretherketone) RODS

PEEK (Polyetheretherketone) can be used at very high tem-peratures (about +260 °C) and it shows an extraordi- nary mechanical strength, toughness, hardness, flexural strength, torsional strength. PEEK exhibits excellent chemical resistance, very good dielectric properties up to +260 °C and a very good resistance to all kinds of radiation (even ultraviolet rays only lead to a slight yellow discolouration). PEEK is self-extin- guishing properties according to UL 94.

Properties

» Very high mechanical strength

» Very high rigidity (also at low temperature)

» Very high thermal stability

» Very high creep resistance

» Very high dimensional stability

» Very high radiation resistance

» Very high hydrolysis resistance

» Relatively low notch impact strength

» Low resistance to acetone

Appliction

»Bearing shells
» Piston rings
» Valve seats
» Gears
» Seals
» Aviation
» Cog wheels
» Pump vanes
» Fittings
» Plug connectors for the chromatography
» Wafer carriers
» Semiconductor industry

    Address

    429/430, Yamuna Vihar
    Kamla Nagar, Agra ( U.P.) - 282004

    Phone

    +91-9045013711

    E-mail

    info@Petronthermoplast.com