Product Advantages – PVDF Elbow45 Degree

WRAS certified epco PVDF Elbow45 Degree, it is made of Polyvinylidene Fluoride. Metric 45 degree elbow pressure pipe fittings are available in sizes ranging from 20mm to 315mm outside diameter.

PVDF 45 degree elbows are pipe fittings used to form a 45 degree angle by joining two sections of pipe of the same diameter.

To do this correctly, read the assembly and joining method recommendations in our technical information and make sure you have the proper PVDF Elbow45 Degree Solvent Cement and Cleaner to join the pipes and fittings together. These metrics can be found in our section on Accessories.

Our PVDF pressure pipe range is made from Polyvinylidene Fluoride and has a working temperature of 150 °C (302 °F) depending on the system pressure.

45°Elbow S X S

C4Lxx/V4Lxx

Size	mm		Weight (kg/pc)
Size	G	H	PVC	CPVC
1/2”	7	29	0.030	0.033
3/4”	9	34	0.040	0.044
1”	8	37	0.064	0.070
1-1/4”	11	43	0.102	0.111
1-1/2”	12	47	0.130	0.142
2”	17	55	0.221	0.235
2-1/2”	20	64	0.359	0.392
3”	24	72	0.580	0.633
4”	29	86	0.915	0.999
5”	36	106	1.595	1.741
6”	41	120	2.580	2.816
8”	50	155	4.925	5.376
10”	60	207	9.375	9.960
12”	81	235	15.330	16.618
14″	101	329	21.100	23.180
16″	107	360	28.732	32.540

45°Elbow FT X FT

C4LxxT/V4LxxT

Size	mm		Weight (kg/pc)
Size	G	H	PVC	CPVC
1/2”	6.8	24.8	0.040	0.044
3/4”	8.5	26.5	0.058	0.063
1”	9.5	31.5	0.094	0.103
1-1/4”	11.3	37.3	0.146	0.160
1-1/2”	12.1	38.1	0.200	0.218
2”	17.0	44.0	0.298	0.326
2-1/2”	19.5	64.0	0.537	0.591
3”	24.0	72.0	0.920	1.012
4”	28.5	86.0	1.503	1.640

45°Elbow S X FT

C4LxxA/V4LxxA

Size	mm			Weight (kg/pc)
Size	G1	G2	H	PVC	CPVC
1/2”	6.8	8.5	24.0	0.030	0.033
3/4”	8.6	4.4	34.0	0.040	0.044
1”	8.4	10.4	37.0	0.064	0.070
1-1/4”	11.3	15.7	43.0	0.102	0.111
1-1/2”	12.1	16.5	47.0	0.130	0.142
2”	16.4	21.1	55.0	0.140	0.207
2-1/2”	14.6	33.8	64.0	0.354	0.342
3”	24.4	38.5	72.0	0.580	0.633
4”	28.9	50.5	86.0	0.415	0.444