PVDF Angle Seat Valve is suitable for high-flow work and is installed in lines where conventional ball and other irrigation valves are difficult to assemble and use.
It is a pneumatically operated, piston-actuated valve with a piston actuator that acts linearly to pull the seal out of its seat. With no seat, the seat is placed at an angle to allow maximum circulation. hot temperatures and large flow rates, such as steam or water; Make PVDF Angle Seat Valve is a good choice.
Installed horizontally or vertically, it is flexible. When used in an underground valve box, it is extremely easy to access and wash after a period of use. Easy Operate PVDF Angle Seat Valves Manufacturer and Exporter in India.
This is made possible by a smooth throttling wheel. A fully closed valve will have zero leakage within the operating pressure range. Design-wise, it is strong and durable. The water hammer does not move when it is turned on.
The VV angle seat valve is a shutting-off and regulating valve particularly suitable for clean fluids.
• Connection system for solvent weld, threaded and flanged joints
• Can be installed in any position
• No metal parts in contact with the fluid
• Valve material compatibility (PVC-U) with water, drinking water and other
food substance conveyance according to current regulations
• Can be maintained with the valve body installed
|Construction||Angle seat shutting-off and regulating valve|
|Size range||DN 10 ÷ 50|
|Nominal pressure||DN 10÷25: PN 16 with water at 20 °C
DN 32÷50: PN 10 with water at 20 °C
|Temperature range||0 °C ÷ 60 °C|
|Coupling standards||Solvent welding: EN ISO 1452, EN ISO 15493, BS
4346-1, DIN 8063, NF T54-028, ASTM D 2467, JIS K
6743. Can be coupled to pipes according to EN ISO
1452, EN ISO 15493, DIN 8062, NF T54-016, ASTM D
1785, JIS K 6741.
Thread: ISO 228-1, DIN 2999, ASTM D 2467, JIS B
Flanging system: ISO 7005-1, EN ISO 1452, EN ISO
15493, EN 558-1 (DN 10÷50) , DIN 2501, ANSI B.16.5 cl.
150, JIS B 2220.
|Reference standards||Construction criteria: EN ISO 1452, EN ISO 15493
Test methods and requirements: ISO 9393
Installation criteria: DVS 2204, DVS 2221, UNI 11242
|Seal material||EPDM+PE (EPDM+PTFE or FKM+PTFE on request)|
|Control options||Manual control|
For water and non-hazardous fluids with regard to which the material is classified as CHEMICALLY RESIS-TANT. In other cases, a reduction of the nominal pressure PN is required(25 years with safety factor).
The Kv 100 flow coefficient is the Q flow rate of litres per minute of water at a temperature of 20°C that will generate Δp= 1 bar pressure drop at a certain valve position. The Kv100 values shown in the table are calculated with the valve completely
The relative flow coefficient is the flow rate through the valve as a function of the degree of valve opening. Horizontal axis: Percentage opening of the valve Vertical axis: Relative flow coeffi- cient
Angle seat valve with female union ends for solvent welding, metric series