For a better experience please change your browser to CHROME, FIREFOX, OPERA or Internet Explorer.
Please contact Us / WhatsApp
+91 8218684097

Rubber Wheel Chocks

Rubber Wheel Chocks

Our rubber wheel chocks are made of styrene-butadiene (SBR) and natural rubber blend resistant to abrasion, fatigue, and weather. Because of the profiled design, this product is a popular choice for preventing vehicle movement or rolling during operation, storage, or service. Our heavy-duty wheel chocks can withstand up to 44 tonnes, while our lighter-duty profiles are also available for applications requiring lower load weights.

Please see the table below for complete availability information on our wheel chocks. You can also buy many of our rubber wheel chocks at PAR Direct by clicking the ‘buy’ button above.

Key Features

Typical Tensile Strength (psi): 3000.
Elongation at Break (psi): 650.

Availability

CWC8 – Rubber Wheel Chock

A ‘cored’ wheel chock manufactured from a natural / SBR rubber compound and is supplied with an eye-bolt fixed at the back.

Material: Natural / SBR rubber compound
Weight (Kg): 3.6
Overall Dimensions (mm): 230(l) x 160(w) x 205(h)
Maximum Load: 44 tonnes

CWC8SP – Rubber Wheel Chock

A ‘cored’ wheel chock manufactured from a natural / SBR rubber compound. The CWC8SP has restricted height and is designed for emergency teams to chock damaged vehicles in road traffic accidents. Supplied with an eye bolt fixed at the back.

Material: Natural / SBR rubber compound
Weight (Kg): 3.5
Overall Dimensions (mm): 235(l) x 160(w) x 140(h)
Maximum Load: 44 tonnes

TPXCHOC – Rubber Wheel Chock

A solid wheel chock manufactured from an extremely tough tyre cord compound. The TPXCHOC has an integral moulded horizontal handle with a moulded hole for fixing to a chain or rope.

Material: Tyre cord fibre
Weight (Kg): 4.4
Overall Dimensions (mm): 254(l) x 185(w) x 200(h)
Maximum Load: 44 tonnes

CWC9 – Rubber Wheel Chock

Supplied as either solid or cored. The solid version has a longer expected life than the cored out version. They are both supplied with a 5mm eye bolt.

CWC9 – Solid CWC9 – Cored
Material: Natural / SBR rubber compound Natural / SBR rubber compound
Weight (Kg): 4.5 3.5
Overall Dimensions (mm): 200(l) x 230(w) x 150(h) 200(l) x 230(w) x 150(h)
Maximum Load: 44 tonnes 44 tonnes

CWC4-SMALL – Rubber Wheel Chock

Ideally suited for use with caravans, boat trailers and motor homes. It is supplied with a blue polypropylene rope handle as standard. CWC4 is light and small for easy storage.

Material: Natural / SBR rubber compound
Weight (Kg): 0.66
Overall Dimensions (mm): 174(l) x 90(w) x 94(h)
Maximum Load: 1000kg

CWCYELL – Rubber Wheel Chock

Ideally suited for use with caravans, boat trailers and motor homes. It is cored out on the sides to reduce weight and make easier to handle. CWCYELL has an integral vertical moulded handle at the rear.

Material: Natural / SBR rubber compound
Weight (Kg): 3
Overall Dimensions (mm): 270(l) x 120(w) x 185(h)
Maximum Load: 10 tonnes

CWC11H – Rubber Wheel Chock

Slightly ‘cored’ on the underneath to reduce weight. It also has an integral moulded horizontal handle at the rear of the chock.

Material: Natural / SBR rubber compound
Weight (Kg): 3.5
Overall Dimensions (mm): 295(l) x 150(w) x 190(h)
Maximum Load: 10 tonnes

CHOKA – Rubber Wheel Chock

Stops pump trucks from sliding during transportation.

Material: Natural / SBR rubber compound
Weight (Kg): 5.8
Overall Dimensions (mm): 545(l) x 300(w) x 80(h)

SRC393 – Rubber Wheel Chock

Manufactured from a 70° black styrene butadiene (SBR) / natural rubber (NR) blend and is often used as wedge for smaller wheels, or to prevent other rounded objects from moving. This chock is supplied in 1 metre lengths and can be cut to suit specific applications. With a service temperature between -15°C up to +70°C, these wheel chocks are quick and easy to deploy, prevent smaller objects from moving, and are hard wearing.

Material: SBR / NR blend
Weight (Kg): 7
Overall Dimensions (mm): 1000(l) x 157(w) x 72(h)

Related Products

Top