PADDLEWHEEL FLOW TRANSMITTER – FLS F6.30
The new FLS F6.30 is a blind transmitter based on paddlewheel. It can be applied for the measurement of every kind of solid-free liquids. TheF6.30 can provides different output options using a 4-20mA and a Solid State Relay. Analog output can be used for long distance transmission and SSR can be set as an alarm oras a volumetric pulse output.F6.30 Paddlewheel Flow Transmitter is provided with an USB interface and a dedicated software (freely downloadable from FLS web site) which allows to easily calibrate instrument and to intuitively set outputs by a PC. The specific design allows an accurate flow measurement over a wide dynamic range in pipe sizes from DN15 (0.5”) toDN600 (24”).
Flow Measurement System
Custom Product Manufacturing Available
If you are searching for customized product designs that meet your requirements, don’t worry. Petron Thermoplast also offers custom product manufacturing services to meet the unique needs of various industries. Work with our expert engineers to create custom designs suited for your application.
APPLICATIONS
• Industrial water and wastewater treatment
• Cooling water systems
• Swimming pools
• Flow control and monitoring
• Water treatment
• Water regeneration plant
• Processing and manufacturing industry
• Water distribution
MAIN FEATURES
• High chemical resistance
• Pipe size range: from DN15 (0,5”) to DN600 (24”)
• Low pressure drop
• Friendly calibration procedure
• 4-20 mA, frequency or volumetric pulse output settable by USB
• SSR settable as alarm by laptop
Technical Data
General
• Pipe Size Range: DN15 to DN600 (0.5” to 24”)
Please refer to Installation Fittings section for more
details
• Flow Rate Range: 0.15 to 8 m/s (0.5 to 25 ft./s)
• Linearity: ± 0.75 % of full scale
• Repeatability: ± 0.5 % of full scale
• Minimum Reynolds Number Required: 4500
• Enclosure: IP65
• Wetted Materials:
– sensor Body: C-PVC, PVDF or 316L SS
– o-rings: EPDM or FPM
– rotor: ECTFE (Halar®)
– shaft: Ceramic (Al2
O3
)/ 316L SS (for metal sensors)
– bearings: Ceramic (Al2
O3
), none (for metal sensor)
Electrical
• Power Supply:
– 12 to 24 VDC ± 10% regulated (reverse polarity and
short circuit protected)
• Max Power Consumption: 150 mA
– protective earth: < 10 Ω
• 1*Current output:
– 4-20 mA, isolated
– max. loop impedance: 800 Ω @ 24 VDC – 250 Ω @
12 VDC
• 1*Solid State Relay output:
– user selectable as MIN alarm, MAX alarm,
Volumetric, Pulse Out, Window alarm, Off
– optically isolated, 50 mA MAX sink, 24 VDC MAX
pull-up voltage
– max pulse/min: 300
– hysteresis: User selectable
Maximum Operating Pressure / Temperature (25 years lifetime)
F6.30 Transmitter
• C-PVC body:
– 10 bar (145 psi) @ 25°C (77°F)
– 1,5 bar (22 psi) @ 80° C (176°F)
• PVDF body:
– 10 bar (145 psi) @ 25°C (77°F)
– 2,5 bar (36 psi) @ 100°C (212°F)
• SS body:
– 25 bar (363 psi) @ 100°C (212°F)
DIMENSIONS
A Sensor body
B F6.30 Paddlewheel Flow Transmitter
1 O-Ring (EPDM or FPM)
2 Sensor body C-PVC, PVDF, 316L SS
3 Halar Rotor, Ceramic shaft & bearings
(316L SS shaft for metal sensors)
4 Cable Gland
5 ABS cap for installation into fittings (SS
cap for metal sensors)
6 Electronic box
WIRING CONNECTIONS
Rear Terminal View
A Sensor body
B F6.30 Paddlewheel Flow Transmitter
1 O-Ring (EPDM or FPM)
2 Sensor body C-PVC, PVDF, 316L SS
3 Halar Rotor, Ceramic shaft & bearings
(316L SS shaft for metal sensors)
4 Cable Gland
5 ABS cap for installation into fittings (SS
cap for metal sensors)
6 Electronic box
GET THE LATEST FLS F6.30 PRICES ON YOUR EMAIL