HOT TAP MAGMETER FLOW SENSOR – FLS F6.61
The new FLS F6.61 Hot Tap Insertion Magmeter Flow Sensor is a flowmeter without moving mechanical parts which can be applied for the measurement of dirty liquids so long as they are conductive and homogeneous. The sensor can provide three different options: frequency output to be connected to FLS flow monitors, 4-20 mA output for long distance transmission and PLC connection and the new volume pulse output freely settable. FLS F6.61 Insertion Magmeter is provided with an USB interface and a dedicated software (freely downloadable from FLS web site) which allows to easily set by a P Call parameters according to specific installation requirements. The sensor can be assembled in a wide dynamic range of pressurized pipe sizes fromDN50 (2”) to DN900 (36”)using a standard clamp saddle and an isolation ball valve.
Flow Measurement System
Custom Product Manufacturing Available
If you are searching for customized product designs that meet your requirements, don’t worry. Petron Thermoplast also offers custom product manufacturing services to meet the unique needs of various industries. Work with our expert engineers to create custom designs suited for your application.
APPLICATIONS
• Water distribution
• Leak Detection or Monitoring
• Raw water intake
• Water and waste water treatment
• Ground water remediation
• Irrigation
MAIN FEATURES
• Adjustable sensor position
• Hot-Tap installation
• Operating parameters settable by PC interface
• Pressure intake
• Standard 1 1⁄4” BSP process connection
• No moving parts, no wear, maintenance free
• Flow Rate Range settable from 0.05 to 8 m/s (0.15 to 25 ft/s)
• Accurate measurement of dirty liquids
• 4-20 mA, frequency or volume pulse outputs
• Bi-directional flow measurement selectable
Technical Data
General
• Pipe Size Range: DN50 to DN900 (2” to 36”). Special
version on request for other sizes. Please refer to
Installation Fitting section for more details
• Max Flow Rate Range:
from 0.05 to 8 m/s (0.15 to 26.24 ft/s)
• Full Scale: 8 m/s (26.24 ft/s)
• Linearity: ± 1% of reading + 1,0 cm/s
• Repeatability: ± 0.5% of reading
• Enclosure: IP65
• Materials:
– case: ABS
• Wetted Materials:
– sensor body: 304 SS/PVDF
– o-rings: EPDM or FPM
– electrodes: 316L SS
Electrical
• Power Supply:
– 12 to 24 VDC ± 10% regulated (reverse polarity and
short circuit protected)
• Max Current Consumption: 250 mA
– protective earth: < 10 Ω
• Current output:
– 4-20 mA, isolated
– max. loop impedance: 800 Ω @ 24 VDC – 250 Ω @
12 VDC
– positive or negative flow indication
• Solid State Relay output:
– user selectable as MIN alarm, MAX alarm,
Volumetric, Pulse Out, Window alarm, Off
– optically isolated, 50 mA MAX sink, 24 VDC MAX
pull-up voltage
– max pulse/min: 300
– hysteresis: User selectable
• Open Collector output (Frequency):
– type: Open Collector NPN
– frequency: 0 – 800 Hz
– max. pull-up voltage: 24 VDC
– max. current: 50 mA, current limited
– compatible with M9.02, M9.50 and M9.07
• Open Collector output (Direction):
– type: Open Collector NPN
– max. Pull-up Voltage: 24 VDC
– max. Current: 50mA, current limited
– flow direction:
0 VDC arrow-wise
+ VDC anti arrow-wise
Enviromental
• Storage Temperature: -30°C to +80°C (-22°F to
176°F)
• Ambient Temperature: -20°C to +70°C (-4°F to
158°F)
• Relative Humidity:0 to 95% (non-condensing)
• Fluid conditions:
– homogeneous liquids, pastes or slurries, also with
solid content
– Min Electrical Conductivity: 20 μS/cm
– Temperature:
PVDF bottom version: -10 °C to +60 °C (14 °F to 140
°F)
PEEK bottom version: -10 °C +150 °C (14 °F to 302
°F)
• Max. operating pressure:
– 16 bar @ 25°C (232 psi @ 77°F)
– 8.6 bar @ 60°C (124 psi @ 140°F)
Standards & Approvals
• Manufactured under ISO 9001
• Manufactured under ISO 14001
• CE
• RoHS Compliant
• EAC
GET THE LATEST FLS F6.60 PRICES ON YOUR EMAIL