PVDF true Union Ball Valve

Polyvinlidene Fluoride PVDF True Union Ball Valve

PVDF Ball Valve BSPT is thread connection Ball Valve by true union type, BS standard, size from 1/2″ to 4″, operated by hand lever. PVDF true Union Ball Valve is completely made by PVDF body with EPDM seal and PTFE seat, it is good corrosive resistance, working pressure PN10. PVDF Ball Valve screw end is easy to installation and replace.

We offer high quality PVDF Ball Valve Screw Port NSPT with specifications as follows:

Basic specification
Size: 1/2 inch ~ 4 inch
Body Material:PVDF 
Seal material:EPDM
Seat Material:PTFE
Socket connection:BSPT
Design pressure:1.0Mpa(PN10 bar)

Feature of valve

All the parts that will touch medium is made from plastic and rubber.  
Self sealing ball design make valve sealing better  
Flange end is optional.  
Actuator mounting plate available

IMPORTANT Properties of PVDF Ball Valve 

  • Mechanical strength and toughness
  • High dielectric strength
  • Readily melt process able
  • Exceptional outdoor weather resistance due to its total inertness to UV radiation
  • Low permeability to most gases and liquids
  • Low flame and smoke characteristics
  • High abrasion resistance
  • Very low creep
  • Mechanical strength and toughness
  • Resistance to most chemicals and solvents
  • Resistance-to nuclear radiation
  • Resistance to fungi
  • Very smooth surfaces can be obtained

PVDF True Union Ball Valve uses

  • Exceptional Chemical Resistance
  • UV Resistant, and Abrasion Resistant PVDF
  • Meets UL 94 V-0
  • Has FDA, USDA and USP VI Approval
  • Easily Machined and Fabricated

PVDF True Union Ball Valve key properties

  • High Chemical Resistance
  • Superior Abrasion Resistance
  • Temperature Range of -40º F to 250º F
  • Socket Fusion Joining System
Tensile Strength, 73°F, at break5075 – 7250psiD 638
35 – 50MPa
Elongation at break, 73°F20 – 50%D 638
Flexural Strength, 73°F2100psiD 790
Impact Strength, Izod, 23 deg C, notched, 4mm thick2.25Ft-lbf/inD 256
Yield StrengthAt 23 deg C7685 – 8265psiD 638
53 – 57MPa
Coefficient of friction, static0.2 to 0.4D 1894
Coefficient of Linear Expansion12 – 14 x 10-5K-1D 696
Melting Point343deg FD 3418
173deg C
Thermal Conductivity1.39Btu·in/h·ft2·°FASTM C 177
Specific Heat, at 300 deg K0.287 – 0.382Btu/lb/deg F
1.2 – 1.6kJ/Kg/deg K
Heat Distortion Temperature, 66 lb/sq.in (0.455 MPa), 4 mm thick293deg FD 648
145deg C
Service Temperatureto 302deg F
to 150deg C
Processing Temperaturedeg F
deg C
Surface Arc-ResistancesecD 495
Volume Resistivity> 1014ohm-cmD 257/DIN 53483
Surface Resistivity, @ 100% RH> 1014Ohm sq-1D 257/DIN 53483
1MHz, 23 deg C7εD150-81
Flame Rating+V-0ClassUL-94
Refractive Index1.41 – 1.42nD 25D 542
Limiting Oxygen Index44% OxygenD 2863
Water Absorption, 230 deg C, 10 Kg< 0.04gm/10 minD 1238
Specific Gravity1.78ISO 1183

    429/430, Yamuna Vihar
    Kamla Nagar, Agra ( U.P.) - 282004