What is ABS Materials?
ABS Materials made by Engineering Plastic which is a thermoplastic polymer often used in the injection molding process. It is one of the most common plastics used Acrylonitrile Butadiene Styrene (ABS) is a common thermoplastic polymer.
ABS material properties, it is a low-cost alternative that may be used in both commercial and residential settings. It’s a fantastic alternative for gatherings. ABS Material is an amorphous, impact-resistant, opaque thermoplastic widely used in the plastics industry.
ABS Full form in plastic (ABS Engineering Plastic Components) manufacturer and supplier in India. We offer the best mechanical properties such as impact resistance, toughness, and stiffness when compared to other common polymers. Several modifications may be made to improve impact resistance, hardness, and heat resistance.
(Acrylonitrile Butadiene Styrene) ABS Materials Advantages
- (Acrylonitrile Butadiene Styrene) ABS piping is a cost-effective solution for both commercial and domestic use. It is resistant to peeling, flaking, rot, disintegration, fading, and leakage (unless punctured).
- Plumbers commonly pick it for drain, waste, and vent pipe systems since it’s ideal for use outside, underground, in high climates, and anywhere else where it won’t be exposed to direct sunlight. ABS pipe is also utilised as a drainage pipe in sewage systems and as an electrical insulator.
ABS IS WIDELY USED FOR:
Machine housings, guards, and covers
Instrument panels
Models and prototypes
Point-of-purchase displays
Storage cases and display bases
Thermoformed displays, trays, and tote bins
PERFORMANCE CHARACTERISTICS:
Outstanding impact resistance
Easy to thermoform
Easy to machine
Easy to bond with adhesives
Strong and stiff
Low cost
COMMON BRANDS:
Royalite®
Polystone®
TECARAN™
STANDARD SIZES
| SHEET | Dimensions: 12 in x 12 in – 48 in x 96 in |
| Thickness: 0.060 in – 4 in |
| ROD | Outside Diameter: 0.250 in – 6 in |
OPTIONS AVAILABLE
| COLOR | Sheet: Natural, White, Off White, Black, Beige, Dark Gray, Light Gray, RedRod: Natural, Black 0.250 in – 6 in |
| TEXTURE, SURFACE, PATTERN | Level Haircell, Smooth / Smooth, Haircell 1 Side |
| GRADES | General Purpose, Fire-Rated, Machine Grade, UV Resistant, Scratch Resistant |
Length, width, thickness, and diameter tolerances vary by size, by manufacturer, brand, and grade. Custom sizes and colors available upon request.
ABS Properties and Material Options
Royalite® R20– thermoplastic sheet is a rigid ABS product with a combination of properties that makes it ideal for the widest range of applications. It has very high impact strength and stiffness, excellent high and low temperature performance, and outstanding formability.
Royalite® R59– is a fire-rated ABS/PVC alloy sheet material, that is often used for transportation, architectural, and electronics applications that require UL certifications.
Royalite® R57– thermoplastic sheet is a fire-rated, rigid ABS/PVC product specifically developed to meet Federal Aviation Administration requirements. It passes FAR 25.853b at 0.047” and above. It combines its light weight with very high impact strength, high tensile strength and stiffness, and excellent formability and ductility.
ABS Sheet for O&P– ABS has excellent thermoforming characteristics. Because of this, it is commonly used for back braces and fabric brace stiffening panels.
Tech Tip– Use Plexus® MA300, a fast-setting methacrylate adhesive, to create stronger bonds than the ABS itself.
TYPICAL PROPERTIES OF ABS
| UNITS | ASTM TEST | ABS | |
|---|---|---|---|
| Tensile strength | psi | D638 | 4,100 |
| Flexural modulus | psi | D790 | 304,000 |
| Izod impact (notched) | ft-lbs/in of notch | D256 | 7.7 |
| Heat deflection temperature @ 264 psi | °F | D648 | 177 |
| Maximum continuous service temperature in air | °F | 160 | |
| Water absorption (immersion 24 hours) | % | D570 | 0.30 |
| Coefficient of linear thermal expansion | in/in/°Fx10-5 | D696 | 5.6 |
| UNITS | ASTM TEST | ABS | |
|---|---|---|---|
| Tensile strength | psi | D638 | 4,100 |
| Flexural modulus | psi | D790 | 304,000 |
| Izod impact (notched) | ft-lbs/in of notch | D256 | 7.7 |
| Heat deflection temperature @ 264 psi | °F | D648 | 177 |
| Maximum continuous service temperature in air | °F | 160 | |
| Water absorption (immersion 24 hours) | % | D570 | 0.30 |
| Coefficient of linear thermal expansion | in/in/°Fx10-5 | D696 | 5.6 |
Flow Measurement System
GET THE LATEST
FLOW MEASUREMENT SYSTEM PRICES ON YOUR EMAIL
High Temperature Insulation
- Coated Glass Cloths
- Brake Lining Materials
- Industrial Laminates
- Hose and Cable Sleeving
- Insulation Boards
- Ceramic and Glass Fibre
- Energy Insulation Materials
- Insulation Jackets
- Aramid Fibre
- Insulation Blankets
- Graphite
Description
The high temperature insulation products are intended to improve performance, safety, and energy efficiency. We have PTFE (often used for heat sealing), rubber, and aluminium coated glass textiles in stock, and our in-house sewing facilities allow us to make compensators, sleeves, and insulating jackets. Along with providing insulation boards, we can also machine materials like Sindanyo and Tufnol. We provide a wide variety of glass and ceramic fibre goods, including sleeves, ladder tapes, and webbing tapes. We carry energy-insulating materials and can also supply high temperature gaskets. The following are the high temperature insulating products that are most in demand.
Coated Glass Cloths
Brake Lining Materials
Industrial Laminates
Hose & Cable Sleeving
Insulation Boards
Ceramic & Glass Fibre
Energy Insulation Materials
Insulation Jackets
Aramid Fibre
Insulation Blankets