In comparison to HDPE, Polyethylene PE1000 rod – UHMW has superior wear resistance and impact strength. Because of its low coefficient of friction, it is exceptionally sturdy and wear-resistant. It also has excellent chemical resistance and absorbs very little moisture. By clicking the link above, you can purchase Polyethylene PE1000 Rod from Petron Thermoplast.
Temperature ranges from -167°C to +90°C.
The wear resistance is exceptional.
It’s simple to manufacture, construct, and weld.
Natural is FDA approved.
The colour black has been UV-stabilized.
The pigment in the black and green rod has been tested and authorised by the FDA, however, it was done separately from the rod’s raw material and not as a whole rod. On this basis, the completed green and black rod cannot be classified as FDA authorised, even if all of the components used are FDA approved separately.
Colour | Rod Length (mm) | Rod Diameter (mm) |
– | – | 20 25 30 35 40 50 60 65 70 80 90 100 |
Natural | 2000 | * * * * * * * * * * * * |
Natural | 1000 | * * * * * * * * * * * * |
Black | 2000 | * – * – * * * * * * * * |
Black | 1000 | * – * – * * * * * * * * |
Green | 2000 | * – – – * * * – * * * * |
Green | 1000 | * – – – * * * – * * * * |
Blue | 2000 | * – – – * * – – – * – * |
Blue | 1000 | * – – – * * – – – * – * |
Colour | Rod Length (mm) | Rod Diameter (mm) |
– | – | 110 120 130 140 150 160 180 200 230 250 300 |
Natural | 2000 | * * * * * * * * * * * * |
Natural | 1000 | * * * * * * * * * * * * |
Black | 2000 | * – * – * * * * * * * * |
Black | 1000 | * – * – * * * * * * * * |
Green | 2000 | * – – – * * * – * * * * |
Green | 1000 | * – – – * * * – * * * * |
Blue | 2000 | * – – – * * – – – * – * |
Blue | 1000 | * – – – * * – – – * – * |
*Denotes standard rod availability.
Note: If a specific colour of material is required, please state this in writing at the point of enquiry.