DUAL-PARAMETER pH/ORP AND FLOW MONITOR AND TRANSMITTER - FLS M9.08
The new FLS M9.08 is a dual monitor which combines pH/ORP and flow measurements.
A wide full graphic display 4” shows measured values clearly and a lot of other useful information. Moreover, due to a multicolor display plus a powerful backlight, measurement status can be determined easily from afar also. A tutorial software guarantees a mistake-proof and fast set up of every settings. Different type of calibrations can be performed to fit user needs for both measurements. A 4-20mA output dedicated to each measurement grants to remote values to an external device. A proper combination of digital outputs allows customized setups for any process to be controlled. The USB port on the rear part allows the upgrade of software offering a wide range of customization services both standard and on request.
Key Features of FLS M9.08
Wide graphic display
Multicolor backlight visualization
Help on board
Simultaneous measurement of pH/ORP and flow
Intuitive calibration procedures
Mechanical relay for external device control
Solid State Relays for programmable alarms
Multi languages menu
USB port for software upgrading
Technical Information
| Specification | Details |
|---|---|
|
Associated sensors |
FLS pH/ORP sensors & FLS hall effect flow sensors with frequency output or FLS F6.60 family sensors |
|
Materials |
case: ABS; display window: PC; panel & wall gasket: silicone rubber; keypad: 5-button silicone rubber |
|
Display |
backlight version: 3-colours; backlight activation: User adjustable with 5 levels of timing |
|
Update rate |
1 second |
|
Enclosure |
IP65 front |
|
pH input range |
-2÷16pH (according to the pH electrode applied) |
|
pH measurement resolution |
± 0.01 pH |
|
ORP input range |
-2000÷ +2000mV (according to the ORP probe applied) |
|
ORP measurement resolution |
± 1 mV |
|
Temperature input range |
-50÷150°C (-58÷302°F) (with Pt100-Pt1000) |
|
Temperature measurement resolution |
0.1°C/°F (Pt1000); 0.5°C/°F (Pt100) |
|
Flow input range (frequency) |
0÷1500Hz |
|
Flow input accuracy (frequency) |
0.5% |
|
Supply Voltage |
12 to 24 VDC ± 10% regulated |
|
Max Power Consumption |
<300mA |
|
FLS hall effect flow sensor power |
5 VDC @ < 20 mA |
|
Protection |
optically isolated from current loop, short circuit protected |
|
Current Output |
2* current output; 4-20 mA, isolated, fully adjustable and reversible; max loop impedance: 1000 Ω @ 24 VDC |
|
Solid State Relay Output |
2* output: (Flow) user selectable as MIN alarm, MAX alarm, Pulse Out, Window alarm, Off; (pH/ORP) user selectable as ON-OFF, Proportional frequency output, Timed Pulse, Off; optically isolated, 50 mA MAX sink, 24 VDC MAX pull-up voltage; max pulse/min: 300; hysteresis: user selectable |
|
Relay Output |
2* output: (Flow) user selectable as MIN alarm, MAX alarm, Pulse Out, Window alarm, Off; (pH/ORP) user selectable as ON-OFF, Proportional frequency output, Timed Pulse, Off; mechanical SPDT contact; expected mechanical life (min. operations): 10⁷; expected electrical life (min. operations): 10⁵ N.O./N.C.; switching capacity 5A/240VAC; max pulse/min: 60; hysteresis: user selectable |
|
Operating temperature |
-10 to +70°C (+14 to +158°F) |
|
Storage temperature |
30 to +80°C (-22 to +176°F) |
|
Relative humidity |
0 to 95% not condensing |
|
Manufactured under |
ISO 9001, ISO 14001 |
|
Compliance |
CE, RoHS Compliant, EAC |
ORP Sensors product Range
Custom Product Manufacturing Available
If you are searching for customized product designs that meet your requirements, don’t worry. Petron Thermoplast also offers custom product manufacturing services to meet the unique needs of various industries. Work with our expert engineers to create custom designs suited for your application.
