EPOXY BODY BULB ELECTRODE - FLS pH/ORP 200
This FLS line of electrodes has been designed to provide a cost effective multi-purpose solution for in line or submersion measurement of pH and ORP in a wide range of applications.
Single and double junction versions are available as well as models with or without quick disconnect top caps. Moreover for automatic temperature compensation function (ATC) a pH option with temperature sensor integrated is available.
These epoxy body electrodes can stand several applications thanks to the high chemical resistance of the material. A simple and reusable gland can be used for economic electrode in-line mounting while a ½” or ¾” coupler with a pipe extension is enough for submersion mounting. A special version is dedicated to installation on FLS T fitting as well as to FLS clamp saddle adding just a nut.
Key Features of FLS pH/ORP 200
Epoxy body
Single or double junction technology
Large gel reference volume
Easy and quick installation system
Outline cable or BNC connection
Version with temperature sensor combined
Special versions on request
Low cost fittings
ORP Sensors product Range
Custom Product Manufacturing Available
If you are searching for customized product designs that meet your requirements, don’t worry. Petron Thermoplast also offers custom product manufacturing services to meet the unique needs of various industries. Work with our expert engineers to create custom designs suited for your application.
Technical Information
General
| Specification | Details |
|---|---|
|
Operating Range |
– pH Electrodes: 0 – 14 pH (0 – 12.3 pH without Na+ error) – ORP Electrodes: ± 2000 mV |
|
Temperature Compensation Device (for TC model) |
PT1000 |
|
Pipe Size Range |
DN15 to DN100 (0.5” to 4”) |
|
Zero Voltage Point New Electrode Performances |
7.00pH ± 0.2pH |
|
Efficiency New Electrode Performances |
> 97% @ 25°C (77°F) |
|
Response Time New Electrode Performances |
– pH: 2 sec for 95% of signal change – ORP: Application dependent |
|
Reference Electrolyte |
Solidified gel 3.5M KCl for single junction versions KCl-KNO3 for double junction versions |
|
Process Connection |
– In-line installation with threaded nipple ½”, ¾” or PG13,5
– FLS installation fittings
– Submersible installation |
|
Max Working Pressure / Working Temperature |
– 7 bar (100 psi) @ 25°C (77°F)
– 1 bar (14.5 psi) @ 65°C (149°F) |
|
Wetted Materials |
– Body: Epoxy
– O-ring Junction: Silicone
– Junction: Pellon®
– Sensing Surface: Glass membrane (pH), Platinum (ORP) |
|
O-ring |
NBR (PH222 CD, PH223 CD, ORP222 CD, ORP223 CD) |
Standards & Approvals
| Specification | Details |
|---|---|
|
Manufactured under |
ISO 9001, ISO 14001 |
|
Certifications |
CE, EAC |
