MAGMETER FLOW SENSOR - FLS F6.60
The new F6.60 and F6.63 are flow meters without moving mechanical parts which can be applied for the measurement of dirty liquids so long as they are conductive and homogeneous.
The F6.60 family can provide three different options: frequency output to be connected to FLS flow monitors, 4-20 mA output for long distance transmission and PLC connection and the new volume pulse output freely settable.
The insertion magmeter family is provided with an USB interface and a dedicated software (freely downloadable from FLS web site) which allows to easily set by a PC all parameters according to specific installation requirements (as full scale and cut off).
The specific design allows an accurate flow measurement over a wide dynamic range in pipe sizes from DN15 (0.5”) to DN600 (24”).
Key Features of FLS F6.60
No moving parts, no wear, maintenance free
High mechanical resistance
High mechanical resistance
Accurate measurement of dirty liquids
Pipe size range: from DN15 (0,5”) to DN600 (24”)
Adjustable Flow Rate Range
Low pressure drop
User Settable Operating Parameters
4-20 mA, frequency or volumetric pulse output
Bi-directional flow measurement selectable (for F6.60)
Special versions for salt-water applications (high concentrations of chlorides like sea water) and for high temperature conditions
Technical Information
General
| Specification | Details |
|---|---|
|
Pipe Size Range |
DN15 to DN600 (0.5” to 24”) |
|
Max Flow Rate Range (F6.60) |
0.05 to 8 m/s |
|
Max Flow Rate Range (F6.63) |
0.15 to 8 m/s |
|
Full Scale |
8 m/s (26.24 ft/s) |
|
Linearity |
± 1% of reading + 1.0 cm/s |
|
Repeatability |
± 0.5% of reading |
|
Enclosure |
IP65 front |
|
Materials (case) |
ABS |
|
Wetted Materials |
Sensor body: 316L SS/PVDF; 316L SS/PEEK; CuNi alloy/PVDF |
|
o-rings |
EPDM or FPM |
|
Electrodes |
316L SS or CuNi alloy |
Electrical
| Parameter | Details |
|---|---|
|
Power Supply |
12 to 24 VDC ± 10% regulated (reverse polarity and short circuit protected) |
|
Max Current Consumption |
250 mA |
|
Protective Earth |
< 10 Ω |
|
Current Output |
4-20 mA, isolated |
|
Max Loop Impedance |
800 Ω @ 24 VDC – 250 Ω @ 12 VDC |
|
Flow Indication |
Positive or negative |
|
Solid State Relay Output |
User selectable as MIN alarm, MAX alarm, Volumetric, Pulse Out, Window alarm |
|
Relay Output Specs |
Optically isolated, 50 mA MAX sink, 24 VDC MAX pull-up voltage |
|
Max Pulse/min |
300 |
|
Hysteresis |
User selectable |
|
Open Collector Output (Frequency) |
Type: Open Collector NPN, Frequency: 0–800 Hz |
|
Open Collector Output Specs |
Max pull-up voltage: 24 VDC, Max current: 50 mA, Compatible with M9.02, M9.50, M9.07, M9.08, M9.10 |
|
Flow Direction |
0 VDC arrow-wise, +VDC anti arrow-wise |
Environmental
| Specifications | Details |
|---|---|
|
Storage Temperature |
-30°C to +80°C (-22°F to +176°F) |
|
Ambient Temperature |
-20°C to +70°C (-4°F to +158°F) |
|
Relative Humidity |
0 to 95% not condensing |
|
Fluid Conditions |
Homogeneous liquids, pastes or slurries, also with solid content |
|
Min Electrical Conductivity |
20 μS/cm |
|
Temperature (PVDF bottom) |
-10°C to +60°C (14°F to 140°F) |
|
Temperature (PEEK bottom) |
-10°C to +150°C (14°F to 302°F) |
|
Max Operating Pressure |
16 bar @ 25°C (232 psi @ 77°F), 8.6 bar @ 60°C (124 psi @ 140°F) |
Standards & Approvals
| Standard | Details |
|---|---|
|
Certifications |
ISO 9001, ISO 14001, CE, RoHS Compliant, EAC
|
Flow Meter Product Range
Custom Product Manufacturing Available
If you are searching for customized product designs that meet your requirements, don’t worry. Petron Thermoplast also offers custom product manufacturing services to meet the unique needs of various industries. Work with our expert engineers to create custom designs suited for your application.
