PADDLEWHEEL FLOW TRANSMITTER - FLS F6.30
The new FLS F6.30 is a blind transmitter based on paddlewheel. It can be applied for the measurement of every kind of solid-free liquids. The F6.30 can provides different output options using a 4-20 mA and a Solid State Relay. Analog output can be used for long distance transmission and SSR can be set as an alarm or as a volumetric pulse output. F6.30 Paddlewheel Flow Transmitter is provided with an USB interface and a dedicated software (freely downloadable from FLS web site) which allows to easily calibrate instrument and to intuitively set outputs by a PC.
The specific design allows an accurate flow measurement over a wide dynamic range in pipe sizes from DN15 (0.5”) to DN600 (24”).
Key Features of FLS F6.30
High chemical resistance
Pipe size range: from DN15 (0,5”) to DN600 (24”)
Low pressure drop
Friendly calibration procedure
4-20 mA, frequency or volumetric pulse output settable by USB
SSR settable as alarm by laptop
Technical Information
General
| Specification | Details |
|---|---|
|
Pipe Size Range |
DN15 to DN600 (0.5” to 24”), refer to Installation Fittings section for more details |
|
Flow Rate Range |
0.15 to 8 m/s (0.5 to 25 ft./s) |
|
Linearity |
± 0.75 % of full scale |
|
Repeatability |
± 0.5 % of full scale |
|
Minimum Reynolds Number Required |
4500 |
|
Enclosure |
IP65 |
|
Wetted Materials |
Sensor Body: C-PVC, PVDF or 316L SS |
|
O-rings |
EPDM or FPM |
|
Rotor |
ECTFE (Halar®) |
|
Shaft |
Ceramic (Al₂O₃) / 316L SS (for metal sensors) |
|
Bearings |
Ceramic (Al₂O₃), none (for metal sensor) |
Electrical
| Specification | Details |
|---|---|
|
Power Supply |
12 to 24 VDC ± 10% regulated (reverse polarity and short circuit protected) |
|
Max Power Consumption |
150 mA |
|
Protective earth |
< 10 Ω |
|
Current Output |
4-20 mA, isolated |
|
Max loop impedance |
800 Ω @ 24 VDC – 250 Ω @ 12 VDC |
|
Solid State Relay Output |
User selectable as MIN alarm, MAX alarm, Volumetric, Pulse Out, Window alarm, Off |
|
Relay Output Specs |
Optically isolated, 50 mA MAX sink, 24 VDC MAX pull-up voltage |
|
Max pulse/min |
300 |
|
Hysteresis |
User selectable |
Standards & Approvals
| Certifiactions | Details |
|---|---|
|
Certifications |
Manufactured under ISO 9001, Manufactured under ISO 14001, CE, RoHS Compliant, EAC, FDA on request for paddlewheel in C-PVC/EPDM, PVDF/EPDM, SS316L/EPDM |
Environmental
| Specification | Details |
|---|---|
|
Storage Temperature |
-30°C to +80°C (-22°F to 176°F) |
|
Ambient Temperature |
-20°C to +70°C (-4°F to 158°F) |
|
Relative Humidity |
0 to 95% (non-condensing) |
Flow Meter Product Range
Custom Product Manufacturing Available
If you are searching for customized product designs that meet your requirements, don’t worry. Petron Thermoplast also offers custom product manufacturing services to meet the unique needs of various industries. Work with our expert engineers to create custom designs suited for your application.
