BATCH CONTROLLER - FLS M9.50
The new FLS M9.50 is an electronic device dedicated to control accurately batching or blending of different liquids.
A 4” wide full graphic display shows measured values clearly and a lot of other useful information.
Moreover, thanks to a multicolor display plus a powerful backlight, batching status can be determined easily from afar also.
A tutorial software guarantees a mistake-proof and fast set up of every setting.
Few advanced options are available to increase precision as well as timing of batch.
Possibility of setting different volumes (up to 10 batches) correlated to specific calibration factors maximizes system flexibility, guaranteeing highest level of accuracy.
A proper package of outputs grants control and monitoring of the batching system remotely.
The USB port on the rear part allows the upgrade of software offering a wide range of customization services both standard and on request.
Key Features of FLS M9.50
Wide full graphic display
Multicolor backlight visualization
Help on board
Overrun compensation and alarm
External start, stop and resume
Intuitive batch volumes setting
Two stage shutdown control
Missing signal alarm
Technical Information
General
| Feature | Specification |
|---|---|
|
Associated Sensors |
FLS hall effect flow sensors with frequency output or FLS F6.60 flow sensor magmeters |
|
Materials – Case |
ABS |
|
Materials – Display Window |
PC |
|
Panel & Wall Gasket |
Silicone rubber |
|
Keypad |
5-button silicone rubber |
|
Display |
LC full graphic display |
|
Backlight Version |
3-colours |
|
Backlight Activation |
User adjustable (5 levels of timing) |
|
Update Rate |
1 second |
|
Enclosure Rating |
IP65 front |
|
Flow Input Range |
0 – 1500 Hz |
|
Flow Input Accuracy |
±0.5% |
Electrical
| Feature | Specification |
|---|---|
|
Supply Voltage |
12 to 24 VDC ±10% regulated |
|
Max Power Consumption |
<300 mA |
|
Sensor Power Supply |
5 VDC @ <20 mA |
|
Isolation |
Optically isolated from current loop |
|
Protection |
Short circuit protected |
|
Solid State Relay Output |
2×; Optically isolated, 50 mA MAX sink, 24 VDC MAX pull-up |
|
Max Pulse/Min (SSR) |
300 |
|
Hysteresis (SSR) |
User selectable |
|
SSR Output Modes |
Two-stage shutdown, overrun, or missing signal alarm |
|
Mechanical Relay Output |
2× SPDT contact |
|
Mechanical Life |
≥10⁷ operations |
|
Electrical Life |
≥10⁵ operations (N.O./N.C.) |
|
Switching Capacity |
5A @ 240 VAC |
|
Max Pulse/Min (Relay) |
60 |
|
Hysteresis (Relay) |
User selectable |
|
Relay Output Modes |
OUT1: Two-stage shutdown, overrun, or missing signal alarm OUT2: Batch in progress indication |
Environmental
| Feature | Specification |
|---|---|
|
Operating Temperature |
-10 to +70°C (+14 to +158°F) |
|
Storage Temperature |
-30 to +80°C (-22 to +176°F) |
|
Relative Humidity |
0 to 95%, non-condensing |
Standards & Approvals
| Certification | Specification |
|---|---|
|
ISO Certifications |
ISO 9001, ISO 14001, CE, RoHS, EAC |
Flow Meter Product Range
Custom Product Manufacturing Available
If you are searching for customized product designs that meet your requirements, don’t worry. Petron Thermoplast also offers custom product manufacturing services to meet the unique needs of various industries. Work with our expert engineers to create custom designs suited for your application.
