DUAL-PARAMETER ANALOG MONITOR & TRANSMITTER - FLS M9.10
The new FLS M9.10 is a powerful monitor and transmitter designed to manage analog and frequency signals (or two analog signals) from every types of device which provide a 4-20mA or a frequency output. M9.10 is equipped with a wide full graphic display 4” which shows measured values clearly and a lot of other useful information. Moreover, due to a multicolor display plus a powerful backlight, measurement status can be determined easily from afar also. A tutorial software guarantees a mistake-proof and fast set up of every parameters. Calibration of 4-20mA input can be performed just fixing 2 points as well as 1 point or using a reference value through a new “in-line calibration”.
Calibration of frequency input can be performed just fixing installation features or using a reference value through a new “in-line calibration”.
Two independent 4-20mA outputs are available to remote measures to external devices. A proper combination of digital outputs (2SSR and 2relays) allows customized setups for any process to be controlled. The USB port on the rear part allows the upgrade of software offering a wide range of customization services both standard and on request.
Key Features of FLS M9.10
Wide graphic display
Multicolor backlight
Help on board
Simultaneous visualization of two parameters
Free setting of engineering unit
Intuitive calibration procedure
In line adjustment
Multilanguage menus
USB port for software upgrading
Technical Information
General
| Specification | Details |
|---|---|
|
Associated sensors |
FLS hall effect flow sensors with frequency output, FLS F6.60 Flow sensor magmeters and all devices which generate a passive or active 4-20mA signal |
|
Materials |
case: ABS; display window: PC; panel & wall gasket: silicone rubber; keypad: 5-button silicone rubber |
|
Display |
LC full graphic display, backlight version: 3-colours, backlight activation: User adjustable with 5 levels of timing |
|
Update rate |
1 second |
|
Enclosure |
IP65 front |
|
Frequency input range (frequency) |
0÷1000Hz |
|
Frequency accuracy (frequency) |
0.5% |
|
Analog input range (frequency) |
3.8÷21.0mA |
|
Analog input accuracy (frequency) |
0.01mA |
Electrical
| Parameter | Details |
|---|---|
|
Supply Voltage |
12 to 24 VDC ± 10% regulated |
|
Max Power Consumption |
<300mA |
|
FLS hall effect Flow Sensor power |
5 VDC @ < 20 mA |
|
Isolation |
Optically isolated from current loop |
|
Short Circuit Protection |
Yes |
|
2* Current output |
4-20 mA, isolated, fully adjustable and reversible |
|
Max loop impedance |
800 Ω @ 24 VDC – 250 Ω @ 12 VDC |
|
Current input power |
18VDC @ ≤20mA |
|
2× Solid State Relay output |
User selectable as MIN alarm, MAX alarm, Pulse Out (for frequency input), Window alarm, Off |
|
Relay output specs |
Optically isolated, 50 mA MAX sink, 24 VDC MAX pull-up voltage; Max pulse/min: 300; Hysteresis: User selectable |
|
2× Relay output |
User selectable as MIN alarm, MAX alarm, Pulse Out (for frequency input), Window alarm, Off |
|
Relay contact type |
Mechanical SPDT contact |
|
Mechanical life |
10⁷ operations |
|
Electrical life |
10⁵ N.O./N.C. switching capacity 5A/240VAC |
|
Max pulse/min |
60 |
|
Hysteresis |
User selectable |
Standards & Approvals
| Certifications | Details |
|---|---|
|
Certifications |
Manufactured under ISO 9001, Manufactured under ISO 14001, CE, RoHS Compliant, EAC |
Environmental
| Parameter | Details |
|---|---|
|
Operating Temperature |
-10 to +70°C (+14 to +158°F) |
|
Storage Temperature |
-30 to +80°C (-22 to +176°F) |
|
Relative Humidity |
0 to 95% not condensing |
Flow Meter Product Range
Custom Product Manufacturing Available
If you are searching for customized product designs that meet your requirements, don’t worry. Petron Thermoplast also offers custom product manufacturing services to meet the unique needs of various industries. Work with our expert engineers to create custom designs suited for your application.
