DUAL-PARAMETER CONDUCTIVITY AND FLOW MONITOR & TRANSMITTER - FLS M9.07
The new FLS M9.07 is a dual monitor and transmitter which combines conductivity and flow measurements. A 4” wide full graphic display shows measured values clearly together with many other useful information. Moreover, due to a multicolor display plus a powerful backlight, measurement status can be determined easily from afar also. A tutorial software guarantees a mistake-proof and fast set up of every parameters. Different type of calibrations can be performed to fit user needs for both measurements. A 4-20mA output dedicated to each measurement grants to remote values to a external device. A proper combination of digital outputs allows customized setups for any process to be controlled. The USB port on the rear part allows the upgrade of software offering a wide range of customization services both standard and on request.
Key Features of FLS M9.07
Wide full graphic display
Multicolor backlight
Help on board
Simultaneous measurement of conductivity, temperature and flow
Fast, intuitive and mistake-proof calibration software
Mechanical relay for external device control
Solid State Relays for programmable alarms
Multilanguage menus
USB port for software upgrading
Technical Information
General
| Parameter | Details |
|---|---|
|
Associated sensors |
FLS conductivity/temperature sensors & FLS hall effect flow sensors with frequency output or FLS F6.60 Flow sensor magmeters |
|
Materials |
– case: ABS
– display window: PC
– panel & wall gasket: silicone rubber
– keypad: 5-button silicone rubber |
|
Display |
LC full graphic display |
|
Backlight version |
3-colours |
|
Backlight activation |
User adjustable with 5 levels of timing |
|
Update rate |
1 second |
|
Enclosure |
IP65 front |
|
Conductivity input range |
0.055÷200000µS/cm (according to the cell constant applied) |
|
Conductivity measurement accuracy |
± 2.0 % of reading value |
|
Temperature input range |
-50÷150°C (-58÷302°F) (with Pt100-Pt1000) |
|
Temperature measurement resolution |
0.1°C/°F (Pt1000); 0.5°C/°F (Pt100) |
|
Flow input range (frequency) |
0÷1500Hz |
|
Flow input accuracy (frequency) |
0,5% |
Electrical
| Parameter | Details |
|---|---|
|
Supply Voltage |
12 to 24 VDC ± 10% regulated |
|
Max Power Consumption |
<300mA |
|
FLS hall effect Flow Sensor power |
5 VDC @ < 20 mA |
|
Isolation |
Optically isolated from current loop |
|
Short Circuit Protection |
Yes |
|
2* Current output |
4-20 mA, isolated, fully adjustable and reversible |
|
Max loop impedance |
800 Ω @ 24 VDC – 250 Ω @ 12 VDC |
Relay Outputs
| Output Type | Details |
|---|---|
|
2* Solid State Relay output |
– (Flow) user selectable as MIN alarm, MAX alarm, Pulse Out, Window alarm, Off
– (Conductivity) user selectable as ON-OFF, Proportional frequency output, Timed Pulse, Off
– Optically isolated, 50 mA MAX sink, 24 VDC MAX pull-up voltage
– Max pulse/min: 300
– Hysteresis: user selectable |
|
2* Relay output |
– (Flow) user selectable as MIN alarm, MAX alarm, Pulse Out, Window alarm, Off
– (Conductivity) user selectable as ON-OFF, Proportional frequency output, Timed Pulse, Off
– Mechanical SPDT contact
– Expected mechanical life (min. operations): 10⁷
– Expected electrical life (min. operations): 10⁵ N.O./N.C. switching capacity 5A/240VAC
– Max pulse/min: 60
– Hysteresis: user selectable |
Environmental
| Parameter | Details |
|---|---|
|
Operating Temperature |
-10 to +70°C (+14 to +158°F) |
|
Storage Temperature |
-30 to +80°C (-22 to +176°F) |
|
Relative Humidity |
0 to 95% not condensing |
Standards & Approvals
| Standard | Status |
|---|---|
|
ISO 9001 |
Manufactured under ISO 9001 |
|
ISO 14001 |
Manufactured under ISO 14001 |
|
CE |
Certified |
|
RoHS Compliant |
Yes |
|
EAC |
Yes |
Applications of FLS M9.07
Flow Meter Product Range
Custom Product Manufacturing Available
If you are searching for customized product designs that meet your requirements, don’t worry. Petron Thermoplast also offers custom product manufacturing services to meet the unique needs of various industries. Work with our expert engineers to create custom designs suited for your application.
