2-WIRES FLOW MONITOR & TRANSMITTER - FLS M9.00
The new FLS M9.00 is a powerful flow monitor and transmitter based on 2-wire technology designed to convert the frequency signal of FLS flow sensors into a flow rate. M9.00 is equipped with a wide 4” display which shows measured values clearly. Moreover, the standard backlight improves further the display visibility.
The first procedure will grant an easy set up of main parameters. A flow rate reference can be used for a recalibration or alignment through a intuitive “in-line calibration”.
A 2 wires 4–20mA output combined with a solid state relay allow to remote instant flow rate as well as an alarm. M9.00 is equipped with a USB port which allows easy updating of instrument software by customer.
Key Features of FLS M9.00
Wide display
Bright backlight
Installation flexibility
Solid State Relays for programmable alarms
Multilanguage menu
USB port for software updating
Technical Information
General
| Feature | Specification |
|---|---|
|
Associated Flow Sensor |
FLS hall effect paddlewheel (freq. output), FLS reed ULF |
|
Materials – Case |
ABS |
|
Materials – Display Window |
PC |
|
Panel & Wall Gasket |
Silicone rubber |
|
Keypad |
5-button silicone rubber |
|
Display |
Transflective technology |
|
Backlight |
Monochrome, available without analog output activation |
|
Update Rate |
1 second |
|
Enclosure |
IP65 front |
|
Flow Input Range (frequency) |
0.5 to 500 Hz |
|
Flow Input Accuracy |
±0.5% |
Electrical
| Feature | Specification |
|---|---|
|
Supply Voltage |
12 to 24 VDC ±10% regulated |
|
Max Power Consumption |
<20 mA (Backlight OFF); <30 mA (Backlight ON) |
|
Backlight |
PC |
|
Panel & Wall Gasket |
Silicone rubber |
|
Keypad |
Available with power supply ≥ 12 VDC |
|
Sensor Type |
FLS hall effect flow sensor |
Outputs & Functions
| Feature | Specification |
|---|---|
|
Operating Temperature |
-10 to +70°C (+14 to +158°F) |
|
Storage Temperature |
-30 to +80°C (-22 to +176°F) |
|
Relative Humidity |
0 to 95%, non-condensing |
Environmental
| Certification | Specification |
|---|---|
|
ISO Certifications |
ISO 9001, ISO 14001 |
|
Other Approvals |
CE, RoHS Compliant, EAC |
|
Special Certification |
FDA on request for paddlewheel in C-PVC/EPDM, PVDF/EPDM, SS316L/EPDM |
Flow Meter Product Range
Custom Product Manufacturing Available
If you are searching for customized product designs that meet your requirements, don’t worry. Petron Thermoplast also offers custom product manufacturing services to meet the unique needs of various industries. Work with our expert engineers to create custom designs suited for your application.
