DUAL-PARAMETER FLOW MONITOR AND TRANSMITTER - FLS M9.03
The new FLS M9.03 is a powerful dual flow monitor designed to convert the frequency signals of FLS flow sensors into flow rates. M9.03 is equipped with a 4” wide full graphic display which shows measured values clearly and a lot of other useful information. Moreover, due to a multicolor display plus a powerful backlight, measurement status can be determined easily from afar also. A tutorial software guarantees a mistake-proof and fast set up of every parameters. Calibrations can be performed just fixing installation features or using a reference value through a new “in-line calibration”. Two 4-20mA output are available to remote each flow rate to an external device. A proper combination of digital outputs allows customized setups for any process to be controlled. The USB port on the rear part allows the upgrade of software offering a wide range of customization services both standard and on request.
Key Features of FLS M9.03
Wide full graphic display
Multicolor backlight
Help on board
Delta flow rates visualization
Fast, intuitive and mistake-proof calibration software
Mechanical relays for external device control
Solid State Relays for programmable alarms
Multilanguage menu
USB port for software upgrading
Technical Information
General
| Feature | Specification |
|---|---|
|
Associated Sensors |
2*FLS hall effect flow sensors with frequency output or FLS F6.60 flow magmeters |
|
Materials |
– case: ABS
– display window: PC
– panel & wall gasket: silicone rubber
– keypad: 5-button silicone rubber |
|
Display |
LC full graphic display |
|
Backlight Version |
3-colours |
|
Backlight Activation |
User adjustable with 5 levels of timing |
|
Update Rate |
1 second |
|
Enclosure |
IP65 front |
|
Flow Input Range (Frequency) |
0÷1500Hz |
|
Flow Input Accuracy (Frequency) |
0.5% |
Electrical
| Parameter | Details |
|---|---|
|
Supply Voltage |
12 to 24 VDC ± 10% regulated |
|
Max Power Consumption |
<300mA |
|
FLS Hall Effect Flow Sensor Power |
5 VDC @ < 20 mA |
|
Isolation |
Optically isolated from current loop |
|
Short Circuit Protection |
Yes |
|
2* Current Output |
– 4–20 mA, isolated, fully adjustable and reversible – max loop impedance: 800 Ω @ 24 VDC – 250 Ω @ 12 VDC |
|
2* Solid State Relay Output |
– user selectable as MIN alarm, MAX alarm, Pulse Out, Window alarm, Off
– optically isolated, 50 mA MAX sink, 24 VDC MAX pull-up voltage
– max pulse/min: 300 |
|
2* Relay Output |
– user selectable as MIN alarm, MAX alarm, Pulse Out, Window alarm, Off
– mechanical SPDT contact
– expected mechanical life (min. operations): 10⁷
– expected electrical life (min. operations): 10⁵ N.O./N.C. switching capacity 5A/240VAC
– max pulse/min: 60
– hysteresis: User selectable |
Environmental
| Parameter | Details |
|---|---|
|
Operating Temperature |
-10 to +70°C (+14 to +158°F) |
|
Storage Temperature |
-30 to +80°C (-22 to +176°F) |
|
Relative Humidity |
0 to 95%, non-condensing |
Standards & Approvals
| Standard | Status |
|---|---|
|
ISO 9001 |
Manufactured under |
|
ISO 14001 |
Manufactured under |
|
CE |
Compliant |
|
RoHS |
Compliant |
|
EAC |
Certified |
Flow Meter Product Range
Custom Product Manufacturing Available
If you are searching for customized product designs that meet your requirements, don’t worry. Petron Thermoplast also offers custom product manufacturing services to meet the unique needs of various industries. Work with our expert engineers to create custom designs suited for your application.
