PPH Dialock 2 Way Diaphragm Valve
PPH Dialog 2 Way Diaphragm Valve Use to control and shut off dirty or scratched substances. The redesigned internal shape of the body increases the flow coefficient and pressure drop, allowing for delicate, precise shutter adjustments over the entire stroke. The valve is quite small and lightweight. There is an ergonomic and quick locking feature on the handwheel, allowing the handwheel to be moved and secured in any position.
Many different materials, body styles and diaphragms can be used with this PPH Dialog 2 Way Diaphragm Valve. Wear-style body re-design improves flow rate and allows precise linear flow regulation throughout the valve’s full range of operation. A variety of options and accessories are available with this pneumatically operated version.
This increases the flow rate. In addition, the PPH Dialog 2 Way Diaphragm Valve allows for precise linear flow control. Through the use of its locking mechanism, the handwheel can be turned and secured in over 300 locations.
PPH Valves
PPH Valves
Get Quick Information
The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body increases flow coefficient, reduce pressure drop and allows a sensitive and precise adjustment along the entire stroke of the shutter. The DK is extremely compact and very light. The innovative handwheel is equipped with a patented immediate and ergonomic operating locking device that allows it to be adjusted and locked in any position.
• Connection system for solvent weld, threaded and flanged joints
• Optimised fluid dynamic design: maximum output flow rate thanks to the
optimised efficiency of the fluid dynamics that characterise the new inter-
nal geometry of the body
• Internal components in metal, totally isolated from the fluid and external
environment
• Modularity of the range: only 2 handwheel and 4 diaphragm and bonnet
sizes for 7 different valve sizes
• Non-rising handwheel that stays at the same height during rotation,
equipped with a graduated optical indicator protected by a transparent
PVC cap with seal O-Ring
• Bonnet fastening screws in stainless steel protected against the external
environment by PE plugs. Absence of metal parts exposed to the external
environment to prevent any risk of corrosion.
• CDSA (Circular Diaphragm Sealing Angle) system that, thanks to the
uniform distribution of shutter pressure on the diaphragm seal, offers the
following advantages:
− reduction in the tightening torque of the screws fixing the actuator to
the valve body
− reduced mechanical stress on all valve components (actuator, body and
diaphragm)
− easy to clean valve interior
− low risk of the accumulation of deposits, contamination or damage to
the diaphragm due to crystallisation
− operating torque reduction
| Technical specifications | |
|---|---|
| Construction | Diaphragm valve with maximized flow rate and DIALOCK® lockable handwheel |
| Size range | DN 15 ÷ 65 |
| Nominal pressure | PN 10 with water at 20° C |
| Temperature range | 0 °C ÷ 60 °C |
| Coupling standards | Solvent welding: EN ISO 1452, EN ISO 15493, BS 4346-1, DIN 8063, NF T54-028, ASTM D 2467. Can be coupled to pipes according to EN ISO 1452, EN ISO 15493, DIN 8062, NF T54-016, ASTM D 1785. Thread: ISO 228-1, DIN 2999, ASTM D 2464. Flanging system: ISO 7005-1, EN ISO 1452, EN ISO 15493, EN 558-1, DIN 2501, ANSI B.16.5 cl. 150, JIS B 2220. |
| Reference standards | Construction criteria: EN ISO 16138, EN ISO 1452, EN ISO 15493 Test methods and requirements: ISO 9393 Installation criteria: DVS 2204, DVS 2221, UNI 11242 |
| Valve material | Body: PVC-U Bonnet and handwheel: PP-GR Position indicator cap: PVC |
| Seal material | EPDM, FKM, PTFE |
| Control options | Manual control; pneumatic actuator |
Butterfly Valve
PRESSURE VARIATION ACCORDING TO TEMPERATURE
For water and non-hazardous fluids with regard to which the material is classified as CHEMICALLY RESIS-TANT. In other cases, a reduction of the nominal pressure PN is required(25 years with safety factor).
PRESSURE DROP GRAPH
KV 100 FLOW COEFFICIENT
| DN | 15 | 20 | 25 | 32 | 40 | 50 | 65 |
|---|---|---|---|---|---|---|---|
| Kv100 l/min | 112 | 261 | 445 | 550 | 1087 | 1648 | 1600 |
The Kv 100 flow coefficient is the Q flow rate of litres per minute of water at a temperature of 20°C that will generate Δp= 1 bar pressure drop at a certain valve position. The Kv100 values shown in the table are calculated with the valve completely open.
RELATIVE FLOW COEFFICIENT GRAPH
The relative flow coefficient is the flow rate through the valve as a function of the degree of valve opening. Horizontal axis: Percentage opening
of the disk Vertical axis: Relative flow coeffi-cient
DKUIV
Hand operated Butterfly valve| d | DN | PN | B | B1 | E | H | H1 | La | R1 | Z | g | EPDMcode | FKMcode | PTFEcode |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 20 | 15 | 10 | 102 | 25 | 41 | 129 | 80 | 90 | 1″ | 100 | 500 | DKUIV020E | DKUIV020F | DKUIV020P |
| 25 | 20 | 10 | 105 | 30 | 50 | 154 | 80 | 108 | 1″1/4 | 116 | 562 | DKUIV025E | DKUIV025F | DKUIV025P |
| 32 | 25 | 10 | 114 | 33 | 58 | 168 | 80 | 116 | 1″1/2 | 124 | 790 | DKUIV032E | DKUIV032F | DKUIV032P |
| 40 | 32 | 10 | 119 | 30 | 72 | 192 | 80 | 134 | 2″ | 140 | 916 | DKUIV040E | DKUIV040F | DKUIV040P |
| 50 | 40 | 10 | 149 | 35 | 79 | 222 | 120 | 154 | 2″1/4 | 160 | 1768 | DKUIV050E | DKUIV050F | DKUIV050P |
| 63 | 50 | 10 | 172 | 46 | 98 | 266 | 120 | 184 | 2″3/4 | 190 | 2668 | DKUIV063E | DKUIV063F | DKUIV063P |
DKOV
DIALOCK® diaphragm valve with flanged monolithic body, drilled PN10/16. Face to face according to EN 558-1| d | DN | PN | B | B1 | F | f | H | H1 | Sp | U | g | EPDMcode | FKMcode | PTFEcode |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 20 | 15 | 10 | 102 | 25 | 65 | 14 | 130 | 80 | 4 | 13.5 | 925 | DKOV020E | DKOV020F | DKOV020P |
| 25 | 20 | 10 | 105 | 30 | 75 | 14 | 150 | 80 | 4 | 13.5 | 990 | DKOV025E | DKOV025F | DKOV025P |
| 32 | 25 | 10 | 114 | 33 | 85 | 14 | 160 | 80 | 4 | 13.5 | 1054 | DKOV032E | DKOV032F | DKOV032P |
| 40 | 32 | 10 | 119 | 30 | 100 | 18 | 180 | 80 | 4 | 14 | 1272 | DKOV040E | DKOV040F | DKOV040P |
| 50 | 40 | 10 | 149 | 35 | 110 | 18 | 200 | 120 | 4 | 16 | 2164 | DKOV050E | DKOV050F | DKOV050P |
| 63 | 50 | 10 | 172 | 46 | 125 | 18 | 230 | 120 | 4 | 16 | 3009 | DKOV063E | DKOV063F | DKOV063P |
| 75 | 65 | 10 | 172 | 46 | 145 | 18 | 290 | 120 | 4 | 21 | 3610 | DKOV075E | DKOV075F | DKOV075P |
EXPLODED VIEW
| DN | 15 | 20 | 25 | 32 | 40 | 50 | 65 |
|---|---|---|---|---|---|---|---|
| A | 40 | 40 | 46 | 46 | 65 | 78 | 78 |
| B | 44 | 44 | 54 | 54 | 70 | 82 | 82 |
- 1 Transparent protection cap(PVC – 1)*
- 2 Customisation plate (PVC-U – 1)
- 3 O-Ring (EPDM – 1)
- 4 Operating mechanism (PP-GR /PVDF – 1)
- 5 Threaded stem – Indicator(STAINLESS steel – 1)
- 6 Compressor (PA-GR IXEF® – 1)
- 7 Diaphragm seal (EPDM, FKM,PTFE – 1)*
- 8 Valve body (PVC-U – 1)*
- 9 Socket seal O-Ring (EPDM-FKM- 2)*
- 10 End connector (PVC-U – 2)*
- 11 Union nut (PVC-U – 2)*
- 12 Washer (STAINLESS steel – 4)
- 13 Bolt (STAINLESS steel – 4)
- 14 Protection plug (PE – 4)\
- 15 Distance plate (PP-GR – 1)**
- 16 Screw (STAINLESS steel – 2)**
* Spare parts
** Accessories
The material of the component and the quantity supplied are indicated in brackets
GET THE LATEST PPH Dialock 2 Way Diaphragm Valve PRICES ON YOUR EMAIL