PVC Butterfly Valve is a quarter-turn rotational motion valve for stopping, regulating, and starting flow. A disc is placed on a revolving shaft in a butterfly valve.
The disc stops the line when the UPVC butterfly valve is fully closed. The disc of the butterfly valve is at a right angle to the flow of gas or liquid when it is completely opened.
The valve may be completely closed or opened by rotating the handle 90 degrees. Large PVC Butterfly Valves are frequently fitted with a gearbox, which connects the hand wheel to the stem through gears. This makes the valve’s functioning easier, but it comes at the best price of speed.
UPVC Butterfly Valves are popular because of their dependability and low maintenance needs. Because of the reduced wear, the pneumatic actuator for butterfly valve useful life can be extended.
This lowers direct operating expenses and minimizes the number of hours spent on valve maintenance. More details about Thermoplastic Manufacturer & Supplier in India.
The FE is a butterfly valve for shutting off or regulating flow, specifically designed for water applications and equipped with
a customisable Labelling System.
• Disk in PVC-U with through shaft
• Zinc plated square section steel stem completely isolated from the fluid
complying with standard ISO 5211: DN 40 ÷ 65: 11 mm DN 80 ÷ 100: 14 mm
DN 125 ÷ 150: 17 mm DN 200: 22 mm
• Can also be installed as a bottom discharge valve or tank dump valve
• Valve material compatibility (PVC-U) with water conveyance, drinking
water and other food substances according to current regulations
• Possibility of directly installing a gearbox or pneumatic and/or electric
actuators with a standard drilling pattern according to standard ISO 5211
F05, F07, F10
|Construction||Bi-directional centric butterfly valve|
|Size range||DN 40 ÷ 200|
|Nominal pressure||Wafer version
DN 40 ÷ 50: PN 16 with water at 20 °C
DN 65÷200: PN 10 with water at 20 °C
|Temperature range||0 °C ÷ 60 °C|
|Reference standards||Flanging system: EN ISO 1452, EN ISO 15493, DIN
2501, ISO 7005-1, EN 1092-1, ANSI B16.5 Cl.150
|Riferimenti Reference standards||Construction criteria: EN ISO 16136, EN ISO 1452, EN
Test methods and requirements: ISO 9393
Actuator couplings: ISO 5211
|Valve material||Body: PVC-U
Stem: Zinc plated carbon steel (C45). On request STAINLESS steel AISI 316
|Seal material||Liner: EPDM, FKM. On request NBR|
|Control options||Hand lever operated; Gearbox, pneumatic actuator,