PTFE Tube - Petron Thermoplast

Description

The PTFE tube is resistant to most chemicals and solvents and can operate at both high and low temperatures. It also has a very low coefficient of friction, making it popular in food contact applications. It has strong thermal and electrical characteristics, however, it is not ideal for wear applications and is difficult to bind. It is also resistant to hot water and UV rays.

Applications

Slide bearings, insulators and rollers.

Key Features

Temperature: -200°C up to +260°C (+260°C short term).
Very good sliding properties and anti-adhesive.
Excellent resistance to chemicals and UV.
Outstanding resistance to low and high temperatures.
Food approved.

Standards

Complies with EC No. 1953/2004 and EC No. 10/2011 for plastic materials and articles intended to come into contact with food.
Complies with FDA food regulations 21 CFR 177.1550 and FDA 21 CFR 175.300.
Provides a UL94 V-0 flammability rating, meaning the polymer will self-extinguish after the removal of flame.

Availability

Also available: PTFE sheet and PTFE rod.

ID (mm)	OD (mm)	Length (mm)
10	15	1000 / 2000
10	20	1000 / 2000
10	30	1000 / 2000
15	25	1000 / 2000
15	30	1000 / 2000
15	35	1000 / 2000
15	40	1000 / 2000
20	30	1000 / 2000
20	35	1000 / 2000
20	40	1000 / 2000
20	45	1000 / 2000
20	50	1000 / 2000
20	55	1000 / 2000
25	35	1000 / 2000
25	40	1000 / 2000
30	40	1000 / 2000
25	45	1000 / 2000
25	50	1000 / 2000
25	55	1000 / 2000
30	45	1000 / 2000
30	50	1000 / 2000
30	55	1000 / 2000
30	60	1000 / 2000
30	65	1000 / 2000
35	45	1000 / 2000
35	50	1000 / 2000
35	55	1000 / 2000
40	50	1000 / 2000
40	55	1000 / 2000
40	60	1000 / 2000
40	70	1000 / 2000
45	55	1000 / 2000
45	60	1000 / 2000
45	65	1000 / 2000
50	60	1000 / 2000
50	65	1000 / 2000
50	70	1000 / 2000
50	75	1000 / 2000
50	80	1000 / 2000
55	65	1000 / 2000
55	70	1000 / 2000
60	70	1000 / 2000
60	80	1000 / 2000
65	75	1000 / 2000
65	85	1000 / 2000
70	80	1000 / 2000
70	85	1000 / 2000
75	90	1000 / 2000
80	90	1000 / 2000
80	100	1000 / 2000

Please note: Larger diameter tubes are available upon request, please enquire.

We can also supply modified TFM PTFE if required. TFM PTFE offers lower deformation under load, lower permeation due to denser polymer structure, better weldability, improved stress recovery, smoother surface finishes and higher transparency. Please note that TFMPTFE may be subject to lead times and availability.