UPVC Wafer Check Valve
UPVC Wafer Check Valve Manufacturer & Supplier in India. As a safety filter, sediment strainers are meant to catch any solid pollutants that may sometimes occur in the line.
We are the valve exports and other equipment with tiny orifices, such as pumps or control valves, are protected by this. The filter screen is simply changeable and available in a variety of meshes.
An oscillating disc is used to open or close the valve. As a result of their design, they may be installed in exceedingly tight places, where a flanged check valve would be ineffective.
As the disc opens, these valves have a moulded body surrounding the opening. In contrast, UPVC Wafer Check Valves have moulded bodies that enable the disc to fully swing open, enabling full flow.
In the case of applications that demand full flow, this is a critical consideration, as you can understand. Therefore, wafer check valves are used in situations where flow isn’t a concern. Swing check Valves are used in applications where a full port valve is needed.
UPVC Valves Range
UPVC Valves Manufacturers in India. We provide different types of Valve Suppliers like- PVC Ball Valve, Ball Valve and Industrial Valves etc. If you want to buy now, click our website.
UPVC Valves Range
UPVC Wafer Check Valve Technical Information
The CR wafer check valve is designed to be installed directly between stubs and flanges in accordance with ISO/DIN standards.
• Installed with FIP QPV (d50 – d160) stubs and QRV stubs using flat gasket QHV/Y (d225 – d315), on PVC piping class PN10 or lower with type ODV flanges
• Metal support for easy and precise centring of the valve during installation
• Can be installed in either a vertical or horizontal position
• Sealing system with O-ring for optimum sealing and installation without
flat gaskets
| Technical specifications | |
|---|---|
| Construction | Wafer check valve |
| Size range | DN 40 ÷ 300 |
| Nominal pressure | 5 bar with water at 20 °C |
| Temperature range | 0 °C ÷ 60 °C |
| Coupling standards | Flanging system: DIN 2501 PN 10, EN ISO 1452,EN ISO 15493 |
| Reference standards | Construction criteria: EN ISO 16137 EN ISO 1452, EN ISO 15493 Test methods and requirements: ISO 9393 Installation criteria: DVS 2204, DVS 2221, UNI 11242 |
| Valve material | PVC-U |
| Seal material | EPDM |
Wafer Check Valve
PRESSURE VARIATION ACCORDING TO TEMPERATURE
For water e non-hazardous fluids with regard to which the material is classified as CHEMICALLY RESIS-TANT. In other cases, a reduction of the nominal pressure PN is required (25 years with safety factor).
PRESSURE DROP GRAPH
KV 100 FLOW COEFFICIENT
The Kv 100 flow coefficient is the Q flow rate of litres per minute of water at a temperature of 20°C that will generate Δp= 1 bar pressure drop at a certain valve position. The Kv100 values shown in the table are calculated with the valve completely
open.
| DN | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 |
|---|---|---|---|---|---|---|---|---|---|---|
| Kv100l/min | 370 | 900 | 1250 | 1867 | 2867 | 5700 | 8167 | 18800 | 25000 | 31900 |
MINIMUM PRESSURE REQUIRED TO OPEN THE VALVE IN A VERTICAL FLOW
| DN | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 |
|---|---|---|---|---|---|---|---|---|---|---|
| bar | 0,002 | 0,003 | 0,003 | 0,003 | 0,003 | 0,003 | 0,005 | 0,005 | 0,008 | 0,008 |
MINIMUM VALVE SEALING PRESSURES
| DN | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 |
|---|---|---|---|---|---|---|---|---|---|---|
| bar | 0,3 | 0,3 | 0,3 | 0,2 | 0,2 | 0,2 | 0,2 | 0,2 | 0,2 | 0,2 |
TIGHTENING TORQUE
*Tightening torques for nuts and bolts on couplings with backing rings. Values required to obtain the hydraulic test seal (1.5 x PN at 20°C) (new or lubricated nuts and bolts)
| DN | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 |
|---|---|---|---|---|---|---|---|---|---|---|
| Nm* | 8 | 10 | 10 | 10 | 0 | 15 | 20 | 38 | 45 | 50 |
CROV
Wafer check valve in PVC-U/EPDM
| d | DN | A | B | C | ISO/DIN | Di | OP | Z | g | *MOP(bar) | Code |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 50 | 40 | 72 | 25 | 28 | 95 | 22 | 0-5 | 16 | 160 | 6 | CROV050E |
| 63 | 50 | 86 | 37 | 29 | 109 | 32 | 0-5 | 20 | 260 | 6 | CROV063E |
| 75 | 65 | 105 | 50 | 31 | 129 | 40 | 0-5 | 20 | 330 | 6 | CROV075E |
| 90 | 80 | 119 | 61 | 32 | 144 | 54 | 0-5 | 20 | 400 | 6 | CROV090E |
| 110 | 100 | 146 | 77 | 31 | 164 | 70 | 0-5 | 22 | 560 | 6 | CROV110E |
| 140 | 125 | 173 | 94 | 35 | 195 | 92 | 0-5 | 23 | 760 | 6 | CROV140E |
| 160 | 150 | 197 | 100 | 40 | 220 | 105 | 0-5 | 25 | 1120 | 6 | CROV160E |
| 225 | 200 | 255 | 152 | 38 | 275 | 154 | 0-5 | 35 | 2130 | 6 | CROV225E |
| 280 | 250 | 312 | 180 | 41 | 330 | 192 | 0-5 | 40 | 3540 | 6 | CROV280E |
| 315 | 300 | 363 | 215 | 41 | 380 | 227 | 0-5 | 45 | 5350 | 6 | CROV315E |
GET THE LATEST UPVC Wafer Check Valve PRICES ON YOUR EMAIL