ABS BALL VALVES
IPEX VKD Series Ball Valves offer a variety of advanced features such as the patented seat stop carrier, a high quality stem and ball support system, and a multifunctional handle with optional lock. The new DUAL BLOCK® system locks the union nuts preventing back-off due to vibrationor thermal cycling. Deep grooves, thick o-rings, and cushioned Teflon® seats contribute to strong seals under pressure while integral mounting features and bracketing combine for simple adaptation for actuation and anchoring. Pressure rated to 232 psi at 73°F. Sizes 3/8″ to 4″.
ABS Valve Range
ABS Valve Range
What Is ABS Valves
ABS Valves are a pressure piping system that is both strong and rigid. ABS piping is a low-cost option for both commercial and residential applications.
It’s a great option for get-togethers. Acrylonitrile Butadiene Styrene (ABS) is an amorphous, impact-resistant, opaque thermoplastic commonly utilised in the plastics industry.
We are able to provide ABS Valve to our clients because of our extensive experience in this field The thermoplastic is composed out of three monomer units, as the name suggests:
- Acrylonitrile: Ammonia and propylene are used to make acrylonitrile, a synthetic monomer.
- Butadiene: Butadiene is a monomer that is generated as a by-product of steam crackers along with ethylene.
- Styrene: Dehydrogenation of ethylbenzene produces styrene, a monomer.
| Size(in) | d(in) | L(in) | Z(in) | H(in) | H1(in) | E(in) | B1(in) | B(in) | C1(in) | C(in) | W(lbs) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/8 | 0.68 | 0.55 | 2.95 | 4.06 | 2.56 | 2.13 | 1.14 | 2.13 | 1.57 | 2.64 | 0.47 |
| 1/2 | 0.84 | 0.63 | 2.80 | 4.06 | 2.56 | 2.13 | 1.14 | 2.13 | 1.57 | 2.64 | 0.45 |
| 3/4 | 1.05 | 0.75 | 3.03 | 4.53 | 2.76 | 2.56 | 1.36 | 2.56 | 1.93 | 3.35 | 0.73 |
| 1 | 1.32 | 0.87 | 3.31 | 5.04 | 3.07 | 2.87 | 1.54 | 2.74 | 1.93 | 3.35 | 0.97 |
| 1-1/4 | 1.66 | 1.02 | 3.70 | 5.75 | 3.46 | 3.39 | 1.81 | 3.25 | 2.52 | 4.25 | 1.53 |
| 1-1/2 | 1.90 | 1.22 | 4.02 | 6.46 | 3.66 | 3.86 | 2.05 | 3.50 | 2.52 | 4.25 | 2.04 |
| 2 | 2.38 | 1.50 | 4.84 | 7.83 | 4.37 | 4.80 | 2.44 | 4.25 | 2.99 | 5.28 | 3.48 |
| 3 | 3.50 | 2.01 | 6.61 | 10.63 | 5.87 | 7.99 | 4.13 | 6.97 | 10.71 | 12.87 | 15.90 |
| 4 | 4.50 | 2.40 | 7.32 | 12.13 | 6.57 | 9.37 | 5.08 | 7.68 | 12.99 | 15.16 | 24.60 |
Flow Coefficients
Flow coefficients (CV) = flow rate in gallons per minute of
water at 68°F that will flow through the valve with a 1 psi
pressure drop. The CV values shown in the table are
calculated with the valve fully open.
| Size(in) | CV |
|---|---|
| 3/8 | 5.60 |
| 1/2 | 14.0 |
| 3/4 | 27.0 |
| 1 | 53.9 |
| 1-1/4 | 77.0 |
| 1-1/2 | 123 |
| 2 | 238 |
| 3 | 497 |
| 4 | 665 |
Components
Sizes 3/8″ to 2″
| # | Component | Material |
|---|---|---|
| 1 | Insert | PVC |
| 2 | Handle | PVC |
| 3 | Stem O-Ring | EPDM |
| 4 | Stem | Duraplus ABS |
| 5 | Ball Seat | PTFE |
| 6 | Ball | Duraplus ABS |
| 7 | Body | Duraplus ABS |
| 8 | Ball Seat O-Ring | PDM |
| 9 | Body O-Ring | EPDM |
| 10 | Socket O-Ring | EPDM |
| 11 | Carrier with Stop Ring | Duraplus ABS |
| 12 | End Connector | Duraplus ABS |
| 13 | Union Nut | Duraplus ABS |
| 16 | Dual Block® | POM |
Sizes 3″ and 4″
| # | Component | Material |
|---|---|---|
| 1 | Protective Cap | PE |
| 2 | Handle | PVC |
| 3 | Bolt | SS |
| 4 | Washer S | S |
| 5 | Ball Seat | PTFE |
| 6 | Ball | Duraplus ABS |
| 7 | Body | Duraplus ABS |
| 8 | Ball Seat O-ring | EPDM |
| 9 | Body O-Ring | EPDM |
| 10 | Socket O-Ring | EPDM |
| 11 | Bolt | SS |
| 12 | End Connector | Duraplus ABS |
| 13 | Union Nut | Duraplus ABS |
| 14 | Washer | SS |
| 15 | Nut | SS |
| 16 | Carrier | Duraplus ABS |
| 17 | Stop Ring | Duraplus ABS |
| 18 | Stem O-Ring | EPDM |
| 19 | Bushing | PTFE |
| 20 | Upper Stem | Duraplus ABS & SS |
| 21 | Lower Stem | Duraplus ABS |
| 22 | Pad | GRPP |
| 23 | Protective Cap | PE |
| 24 | Spring | SS |
| 25 | Nut Block | GRPP |
| 26 | Cover | PP |
| 27 | Nut Block Button | GRPP |
| 28 | Protective Cap | PE |
| 29 | Screw N | ylon |
BALL VALVES CON’T
Sample Specification
1.0 Ball Valves – VKD
1.1 Material
• The valve body, stem, ball and unions shall be made of
DuraplusTM ABS compound which shall meet or exceed
the requirements of cell classification 43234 according
to ASTM D3965.
1.2 Seats
• The ball seats shall be made of Teflon® (PTFE).
1.3 Seals
• The o-ring seals shall be made of EPDM.
2.0 Connections
2.1 Socket style
• The socket end connections shall conform to DuraplusTM
ABS pipe dimensions as manufactured by IPEX.
3.0 Design Features
• The valve shall be double blocking with union ends.
• All valves shall be full port.
• All valves shall allow for bi-directional flow.
• The valve body shall be single end entry with a threaded
carrier (ball seat support).
• The threaded carrier shall be adjustable with the valve
installed.
• The valve body shall have an expansion and contraction
compensating groove on the molded end.
• The valve body, union nuts, and carrier shall have deep
square style threads for increased strength.
• The ball shall be machined smooth to minimize wear
on valve seats.
• All valve seats shall have o-ring backing cushions to
compensate for wear and prevent seizure of the ball.
• The stem design shall feature double o-ring seals as well
as a safety shear point above the o-rings.
• All valves shall have integrally molded mounting features
for actuation.
• All valves shall have integrally molded support
bracketing for anchoring.
• The valve shall include the Dual Block® union nut
locking mechanism.
3.1 Pressure Tested
• All valves shall have been pressure tested in both the
open and closed positions by the manufacturer.
3.2 Pressure Rating
• All valves shall be rated at 232 psi at 73oF.
3.3 Markings
• All valves shall be marked to indicate size, material
designation, and manufacturers name or trade mark.
3.4 Color Coding
• All valves shall be color-coded light gray.
4.0 All valves shall be Duraplus® ABS by IPEX or
approved equal.
GET THE LATEST ABS Ball Valves PRICES ON YOUR EMAIL