Single Union Ball Check Valves

IPEX Single Union Ball Check Valves provide a simple solution for preventing backflow in a Duraplus ABS piping system. The single union design allows easy dismantling of the system for in-line maintenance while guide ribs allow for maximum flow and minimum turbulence, preventing ball sticking and chatter. Just a few psi of back pressure is needed for positive shut off in both vertical and horizontal orientations. Pressure rated to 150 psi at 73oF. Sizes 3/8″ to 3″.

 
Size(in) d(in) Z(in) A(in) B(in) W(lbs)
3/8 0.68 2.44 1.89 3.74 0.24
1/2 0.84 2.44 1.89 3.74 0.22
3/4 1.05 2.87 2.32 4.41 0.36
1 1.32 3.11 2.72 4.88 0.55
1-1/4 1.66 3.70 3.78 5.83 1.34
1-1/2 1.90 3.46 3.78 5.83 1.27
2 2.38 4.13 4.06 6.97 1.76
3 3.50 4.49 7.01 8.46 6.08

Sample Specification

1.0 Ball Check Valves
1.1. Material
• The valve body, ball, and union shall be made of
DuraplusTM ABS compound which shall meet or exceed
the requirements of cell classification 43234 according
to ASTM D3965.
1.2. Seals
• The gasket and o-ring seal shall be made of EPDM.
2.0 Connections
2.1. Socket style
• The socket end connections shall conform to
DuraplusTM ABS pipe dimensions as manufactured
by IPEX.
3.0 Design Features
• The valve shall have a single union design to allow for
in-line maintenance.
• The valve body shall be single end entry.

• The valve body shall have guide ribs to allow for
maximum flow and minimum turbulence, to prevent
ball sticking and chatter.
• The valve shall provide positive shut off in both vertical
and horizontal orientations.
3.1. Pressure Rating
• All valves shall be rated at 150 psi at 73oF.
3.2. Markings
• All valves shall be marked to indicate size, material
designation, and manufacturers name or trade mark.
3.3. Color Coding
• All valves shall be color-coded light gray.
4.0 All valves shall be DuraplusTM ABS by IPEX
or approved equal.

 

GET THE LATEST SINGLE UNION BALL CHECK VALVES PRICES ON YOUR EMAIL