Many of the filter media offered by PAR Group are produced and categorised in accordance with the efficiency classes specified in standard EN 779. They are made using a variety of methods, including needle-spinning and thermobonding, and come in a range of premium materials, including synthetic fibre, glass fibre, and anti-static needle felt.
Filter media is frequently used in heating, ventilation, and air conditioning (HVAC) systems to separate fine, medium, or coarse particles and control air quality. Depending on the grade, filter media can also help disperse dust-induced electrostatic charge in product transfer applications, remove moist particles from spray booths, and reduce air pollution.
At PAR, we can pre-cut filter material to your specifications.
Open cell polyester foams are commonly used in air filtration applications in HVAC systems. They are supplied flame retardant as standard and do not swell when in contact with detergents, fuels, soaps, mineral oils, water and greases. Reticulated filer foam is available in PPI options of 20, 30, 45 and 60.
Disposable panel filters are commonly used in pre-filtration applications on HVAC systems. They are constructed from a G4 non-woven cotton fibre which is encased in a heavy duty cardboard holding frame. Pleated panel filters provide good dust retention capacity and are available in a range of popular sizes.
A highly efficient material manufactured from polyester. Synthetic fibre media is commonly applied as a pre-filter in HVAC systems and can also be used in food applications. The media provides excellent dust holding capacity and is supplied by the roll in G3, G4 and M5 options (with other grades available upon request).
A thermoplastic hose, reinforced with braided textile plies. This hose is specifically designed for use with fixed or swinging fire hose reels. Available in 19mm and 25mm inside diameter. Temperature range of -20°C up to +75°C.
The red SBR (styrene-butadiene) cover and black SBR liner are reinforced with high strength braided textile plies. Available in 19mm and 25mm inside diameter. Temperature range of -20°C up to +75°C.
Commonly used for firefighting, wash down and jet spray applications. Many of our stocked and most popular nozzles can be fitted to layflat fire hose using female BS336 instantaneous couplings.
We supply a wide range of hydrant standpipes and accessories, including single outlet, double outlet, single and double contractor types, extensions and replacement inlet and outlet seals.
Manufactured from a maintenance free, glass reinforced polyester resin, our range of cabinets can accommodate one, two or four flat wound hoses, or fixed/swinging hose reels as required.
The two component lining comprises of a polyester jacket with transparent polyurethane liner. The ribbed NBR coating provides further external resistance to abrasion and oils. WRAS approved for use with potable water. Available from 19mm – 152mm inside diameter. Temperature range of -30°C up to +80°C.